MC-50(T)
1 / 1Páginas

Excertos do catálogo

DNH WW Ltd DNH GmbH DNH Speakers Inc CIRCUIT DIAGRAM 70/100 Volt combined transformer Primary connections Secondary nominal tappings Installation, Operation and Maintenance Procedures ■ Unscrew lid, lead cable through cable gland and connect to terminal according to required power. ■ Tighten cable gland and fasten termination chamber lid with a torque of 1-2 Nm to assure IP grade. ■ Fasten the bracket to wall or ceiling with three screws. ■ To change the position of the loudspeaker, please adjust the bracket (by loosening / tightening the screws) as required. ■ For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. ■ Do not open loudspeaker when energized. ■ This loudspeaker is supplied with a two years warranty against defective workmanship. DNH reserves the right to alter specifications without notice

Abrir o catálogo na página 1