CAS-6(T)
1 / 1Páginas

Excertos do catálogo

HEAD OFFICE. NORWAY Cable gland nominal tappin Sound pressure levels at lW/lm Installation, Operation and Maintenance Procedures ■ Termination side is marked with label. ■ Remove lid by 3 screws, lead cable through the cable gland and connect to terminal 70V (white - green) or 100V ■ Choose required power on the transformer. ■ Screw lid back into place by 3 screws with a torque of 1 - 2 Nm to assure the IP rating. ■ To mount, slide two M6 nuts in slot and fasten the swivel bracket with two bolts. Slide swivel bracket to wanted position and tighten bolts. ■ For optimum performance, always use the correct voltage / power and operate within the frequency limits as ■ Do not open loudspeaker when energized. ■ This loudspeaker is supplied with a 2 year warranty against defective workmanship. ■ Available with an aluminum swivel bracket. DNH reserves the right to alter specifications without notice ^ ^

Abrir o catálogo na página 1