HULLGARD EPOXY PRIMER
1 / 2Páginas

Excertos do catálogo

HULLGARD EPOXY PRIMER - 1

PRODUCT DATA SHEET (EU ONLY) HULLGARD EPOXY PRIMER D6070/D3707 Features & Uses Hullgard Epoxy Primer is a two component epoxy primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. It offers a long overcoating interval without sanding to reduce work time for underwater systems. Specification Data Type: Two component epoxy Color: Buff Packaging: Available in a 1 Gallon container (base, filled to ¾ GL) and 1 Quart (converter, filled to 1QT). Mixed volume 1 US Gallon. 2 Theoretical Coverage – 140 Sq. feet/gallon = 3.5 m /litre at 5.5 mils/135 microns DFT or 360 Sq. feet/ gallon (9m²/lt) at 2 mils/ 50 microns DFT. Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment. Recommended Wet Film Thickness: 12 mils (300 microns) per coat by spray, 4 mils (100 microns) per coat by brush/roller. Recommended Dry Film Thickness: 5.5 mils (138 microns) per coat by spray, 2 mils (50 microns) per coat by brush/roller. Number of coats: See application instructions Anticipated drying time at 77° F/25° 2 hours touch dry; 7 hours hard dry. C: Recoatability (At 77° 25° 50% RH): F/ C, With Itself: 2 hours (minimum) Maximum recoat time without sanding 6 months. Inspection for cleanliness recommended prior to subsequent application. Ensure dust is removed and remove any dirt pick-up with T0006. If recoatability time is exceeded abrade using 180 – 220 grit paper. With Antifouling: Minimum 2 hours by brush/roller or 6 hours by spray at recommended film thickness. Maximum recoat time 7 hours by brush/roller or 16 hours by spray at recommended film thickness. VOC: Base (D6070) – 391g/lt or 3.26 lbs/gallon Converter (D3707) – 634 g/lt or 5.29 lbs/gallon Application Equipment Apply by airless spray, air atomized spray, brush or roller. Airless spray is the most efficient way to apply this product 2270 Morris Avenue • Union, New Jersey 07083 • USA • Tel: 908.686.1300 • Fax: 908.964.2219 Bannerlaan 54 • B-2280 Grobbendonk • Belgium • Intl. Tel: 32.14.257770 • Intl. Fax: 32.14.230880 76 Waterway Drive • Coomera • QLD 4209 • Australia • Tel: 61.7.5573.9655 or 1800.007.866 • Fax: 61.7.5573.9677 686 Rosebank Road • Avondale • Auckland • New Zealand • Tel: 64.9.828.3009 or 0800.150.527 • Fax: 64.9.828.1129 No.1 Tuas Avenue 4 • Singapore 639382 • Tel: 65.6862.2928 • Fax: 65.6862.0778 Page 1 of 2 • Rev 8 – APRIL 2013 • HULLGARD EPOXY PRIMER (EU ONLY)

Abrir o catálogo na página 1
HULLGARD EPOXY PRIMER - 2

PRODUCT DATA SHEET (EU ONLY) HULLGARD EPOXY PRIMER D6070/D3707 Airless Equipment Graco or Binks equivalent: : Orifice Size………….028” – .043” Fan size & Angle…..8” – 80° or 6” – 60° , On a 25-1 pump, the input pressure gauge should read 70 to 80 lbs. On a 40-1 pump, the input pressure gauge should read 50 to 60 lbs. Spray gun………..#95 Fluid nozzle……..#68SS (.110” Orifice size) Fluid needle……..#668 Air nozzle………..#68PB Pressure gauge should read 15-25 lbs. Atomizing pressure 50+ lbs. Surface Preparation Hullgard Epoxy Primer may be directly applied to grit blasted steel in accordance with...

Abrir o catálogo na página 2

Todos os catálogos e folhetos Awlgrip

  1. Max Cor CF Primer

    2 Páginas

  2. 545

    2 Páginas

  3. AWLBRITRE

    2 Páginas

  4. Awlcare

    2 Páginas

  5. Awlcraft SE

    3 Páginas

  6. AWL®COAT TPC

    2 Páginas

  7. Wash Primer CF

    2 Páginas

  8. Satin Matt

    3 Páginas

  9. Griptex

    3 Páginas

  10. Awlgrip Topcoat

    2 Páginas

  11. Crater-X

    2 Páginas

  12. Awlfair LW

    3 Páginas

  13. Awlfair Pumpable

    2 Páginas

  14. Surface Cleaner

    2 Páginas

  15. D3200 D6200

    4 Páginas

  16. Awlcoat TPC

    2 Páginas

  17. Alumiprep 33

    1 Páginas

  18. Awlwood

    5 Páginas

  19. Awlcare

    2 Páginas

  20. Awlwash

    2 Páginas

  21. 345 HS PRIMER

    3 Páginas

  22. 321 HS UNDERCOAT

    3 Páginas

  23. Awlcraft SE

    3 Páginas

  24. Activators

    2 Páginas

  25. 345HS Primer

    3 Páginas

  26. Awlcraft 2000 VOC

    2 Páginas

  27. Pro-Cure

    2 Páginas

  28. REDUCERS

    3 Páginas

Catálogos arquivados

  1. AWL®COAT TPC

    2 Páginas

  2. AWLGRIP

    6 Páginas

  3. CF 2K

    3 Páginas