Awlfair Surfacing Filler
1 / 3Páginas

Excertos do catálogo

Awlfair Surfacing Filler - 1

Product Data Sheet Awlfair Surfacing Filler D6200 / D3200 Uses Awlfair Surfacing Filler is a premium two-component epoxy product. It is a non-shrinking glazing filler applicable over Awlfair LW Fairing Compound where it is used to fill sand scratches, pinholes and surface imperfections. Awlfair Surfacing Filler gives an outstanding smooth finish prior to applying the sealing, high build or finish primer. Utilizing the same technology as Awlfair LW, Awlfair Surfacing Filler has outstanding solvent resistance coupled with an improved Health and Safety profile. Specification Data Packaging: Available in 1HG pack (fill volume 1.89lts) base and 1QT pack (fill volume 0.946lts). Trowels, Spatulas, Putty Knives Theoretical Coverage Per Coat Awlfair Surfacing Filler is typically applied in several tight screeded layers up to a maximum total thickness of 20 mils / 500 microns Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment. VOC All VOC information contained herein is theoretical (unless otherwise stated). Actual VOC content may vary by batch and when tested via standard test methodology Product Volume Solids: Specific Gravity: Surface Preparation The surface preparation advice provided, and equipment suggestions, can be used as a guide. Preparation techniques and results will vary according to individual conditions, equipment age and other factors. Testing on a non-critical area should be carried out prior to full-scale preparation. 2270 Morris Avenue • Union, New Jersey 07083 • USA • Tel: 908.686.1300 • Fax: 908.964.2219 Bannerlaan 54 • B-2280 Grobbendonk • Belgium • Intl. Tel: 32.14.257770 • Intl. Fax: 32.14.230880 76 Waterway Drive • Coomera • QLD 4209 • Australia • Tel: 61.7.5573.9655 or 1800.007.866 • Fax: 61.7.5573.9677 686 Rosebank Road • Avondale • Auckland • New Zealand • Tel: 64.9.828.3009 or 0800.150.527 • Fax: 64.9.828.1129 No.1 Tuas Avenue 4 • Singapore 639382 • Tel: 65.6862.2928 • Fax: 65.6862.0778 Page 1 of 3 Awlfair Surfacing Filler

Abrir o catálogo na página 1
Awlfair Surfacing Filler - 2

Product Data Sheet Awlfair Surfacing Filler D6200 / D3200 Awlfair LW Fairing Compound should be sanded prior to application of the Awlfair Surfacing Filler. See the relevant product datasheet for more details Mixing & Reduction Mixing and reduction requirements will vary according to individual conditions, climate, equipment age and other factors. Mixing and application of a small sample before full scale application is recommended Application Method Putty Knife, trowel or spatula Recommended Thinning Do not thin Mix the two components thoroughly to a uniform brown colour with no streaks or...

Abrir o catálogo na página 2
Awlfair Surfacing Filler - 3

Product Data Sheet Awlfair Surfacing Filler D6200 / D3200 Note: In all cases, Awlfair Surfacing Filler must be sanded prior to recoating with itself or any other primer. Once sanded Awlfair Surfacing Filler must be overcoated within 24 hours. Do not spray topcoat direct to Awlfair Surfacing Filler. Awlfair Surfacing filler High Build Ultra Build Hullgard Epoxy Primer Hullgard Extra Epoxy Primer Epoxy Sprayable Fairing Compound *Awlfair Surfacing Filler must be sanded prior to overcoating **To achieve the optimum aesthetic result overcoat Awlfair Surfacing Filler with High Build Epoxy Primer...

Abrir o catálogo na página 3

Todos os catálogos e folhetos Awlgrip

  1. Max Cor CF Primer

    2 Páginas

  2. 545

    2 Páginas

  3. AWLBRITRE

    2 Páginas

  4. Awlcare

    2 Páginas

  5. Awlcraft SE

    3 Páginas

  6. AWL®COAT TPC

    2 Páginas

  7. Wash Primer CF

    2 Páginas

  8. Satin Matt

    3 Páginas

  9. Griptex

    3 Páginas

  10. Awlgrip Topcoat

    2 Páginas

  11. Crater-X

    2 Páginas

  12. Awlfair LW

    3 Páginas

  13. Awlfair Pumpable

    2 Páginas

  14. Surface Cleaner

    2 Páginas

  15. D3200 D6200

    4 Páginas

  16. Awlcoat TPC

    2 Páginas

  17. Alumiprep 33

    1 Páginas

  18. Awlwood

    5 Páginas

  19. Awlcare

    2 Páginas

  20. Awlwash

    2 Páginas

  21. 345 HS PRIMER

    3 Páginas

  22. 321 HS UNDERCOAT

    3 Páginas

  23. Awlcraft SE

    3 Páginas

  24. Activators

    2 Páginas

  25. 345HS Primer

    3 Páginas

  26. Awlcraft 2000 VOC

    2 Páginas

  27. Pro-Cure

    2 Páginas

  28. REDUCERS

    3 Páginas

Catálogos arquivados

  1. AWL®COAT TPC

    2 Páginas

  2. AWLGRIP

    6 Páginas

  3. CF 2K

    3 Páginas