Catálogos >
Alfa Laval Mid Europe >
Oil cleaning : S & P Flexrange/P-Seperators 605-615

Oil cleaning : S & P Flexrange/P-Seperators 605-615
1 / 4Páginas

Excertos do catálogo

Oil cleaning : S & P Flexrange/P-Seperators 605-615 - 1

Flex separation systems, P-separators 605/615 Cleaning systems for lubricating and lighter fuel oils* Separator Control cabinet including EPC 60 and optional starter * P-separators 605/615 can also be used to clean heavier oils with well-defined densities. S and P Flex separation systems Alfa Laval’s S and P Flex separation systems combine the high efficiency, low sludge output and low operating cost of Alfa Laval centrifugal separators with a flexible scope of supply Extensive possibilities for the separation system . layoutand assembly make it possible to suit any engine room and any oil separation application. In addition, S and P Flex separation systems feature the EPC 60 controller, which enables the intuitive navigation of menus, parameters and alarms. The EPC 60 controller also has a modular construction for easy I/O board addition and replacement. The S and P Flex separation concept includes the complete S- and P-separator range. These can be combinedin mixed ship sets, even within a single customer-specified module. Change-over valve Water block Flex system components for P-separators 605/615. Application P-separators P-separators are based on purifier technology, which means that the oil/water interphase is manually adjusted by means of a gravity disc. Because the separators do not automatically adjust to varying oil density, they are most suitable for economicalcleaning of the following: • Lubrication oils • Distillates • Lighter diesel oils If the oil is well defined and does not vary in density, P-separators can also be manually adjusted to clean heavy fuel oils with densities up to 991 kg/m3 and viscosities up to 700 cSt/50ºC. P-separators are designed for automatic operation at sea and in automated power stations ashore.

Abrir o catálogo na página 1

Oil cleaning : S & P Flexrange/P-Seperators 605-615 - 2

Scope of supply The S and P Flex separation concept provides a wide range of alternatives for P-separators. Depending on the need, a P-separator can be suppliedas a separator and ancillaries, as a customer-specified module, or as part of a comprehensive packageincluding servicesand order- specific documentation. Module examples Single Flex module with separator (excluding heater and pump) Single Flex module with separator, heater and pump Flex system A P-separator with ancillaries in the form of optimized block components provides full say over the use of space. This allows for local...

Abrir o catálogo na página 2

Oil cleaning : S & P Flexrange/P-Seperators 605-615 - 3

Operating principle A Flex separation system based on a P-separator 605/615 is operated automatically by the EPC 60 controller, apart from the starting of the separator. Untreated oil, heated to the correcttemperature, is fed continuously to the separator , which is driven by an electric motor via a friction clutch and belt. The separator bowl is fixed at the top of a spindle, which is supported by bearings and special composite springs. This bowl can be arranged as a purifier or as a clarifier. Both configurationsremove sludge, which accumulates at the bowl periphery and is...

Abrir o catálogo na página 3

Oil cleaning : S & P Flexrange/P-Seperators 605-615 - 4

Operations A preventive maintenance programme using Alfa Laval Service Kits ensures safe and easy maintenance. Max. recommended capacity, l/h on lubricating oils for trunk piston engines • ervice kits contain all ecessary S n spare parts for each service and tips for maintenance at regular intervals: – Intermediate Service Kit with O-rings and seals for separator bowl, inlet and outlet – Major Service Kit with parts for drive system, belt, bearings and friction pads • The System Manual includes detailed information in electronic or printed form: – Installation instructions – Operating...

Abrir o catálogo na página 4