Catálogos >
Alfa Laval Mid Europe >
Flex separation systems, P-separators 605/615

Flex separation systems, P-separators 605/615
1 / 4Páginas

Excertos do catálogo

Flex separation systems, P-separators 605/615 - 1

Flex separation systems, P-separators 605/615 Cleaning systems for lubricating and lighter fuel oils* Separator Control cabinet including EPC 60 and optional starter * P-separators 605/615 can also be used to clean heavier oils with well-defined densities. S and P Flex separation systems Alfa Laval’s S and P Flex separation systems combine the high efficiency, low sludge output and low operating cost of Alfa Laval centrifugal separators with a flexible scope of supply Extensive possibilities for the separation system . layoutand assembly make it possible to suit any engine room and any oil separation application. In addition, S and P Flex separation systems feature the EPC 60 controller, which enables the intuitive navigation of menus, parameters and alarms. The EPC 60 controller also has a modular construction for easy I/O board addition and replacement. The S and P Flex separation concept includes the complete S- and P-separator range. These can be combinedin mixed ship sets, even within a single customer-specified module. Change-over valve Water block Flex system components for P-separators 605/615. Application P-separators P-separators are based on purifier technology, which means that the oil/water interphase is manually adjusted by means of a gravity disc. Because the separators do not automatically adjust to varying oil density, they are most suitable for economicalcleaning of the following: • Lubrication oils • Distillates • Lighter diesel oils If the oil is well defined and does not vary in density, P-separators can also be manually adjusted to clean heavy fuel oils with densities up to 991 kg/m3 and viscosities up to 700 cSt/50ºC. P-separators are designed for automatic operation at sea and in automated pow

Abrir o catálogo na página 1

Flex separation systems, P-separators 605/615 - 2

Scope of supply The S and P Flex separation concept provides a wide range of alternatives for P-separators. Depending on the need, a P-separator can be suppliedas a separator and ancillaries, as a customer-specified module, or as part of a comprehensive packageincluding servicesand order- specific documentation. Module examples Single Flex module with separator (excluding heater and pump) Single Flex module with separator, heater and pump Flex system A P-separator with ancillaries in the form of optimized block components provides full say over the use of space. This allows for local...

Abrir o catálogo na página 2

Flex separation systems, P-separators 605/615 - 3

Operating principle A Flex separation system based on a P-separator 605/615 is operated automatically by the EPC 60 controller, apart from the starting of the separator. Untreated oil, heated to the correct temperature, is fed continuously to the separator, which is driven by an electric motor via a friction clutch and belt. The separator bowl is fixed at the top of a spindle, which is supported by bearings and special composite springs. This bowl can be arranged as a purifier or as a clarifier. Both configurations remove sludge, which accumulates at the bowl periphery and is intermittently...

Abrir o catálogo na página 3

Flex separation systems, P-separators 605/615 - 4

Operations A preventive maintenance programme using Alfa Laval Service Kits ensures safe and easy maintenance. • Recommended maintenance intervals: - Intermediate Service every 2 000 hours or 3 months - Major Service every 8 000 hours or 12 months • Service kits contain all necessary spare parts for each service and tips for maintenance at regular intervals: - Intermediate Service Kit with O-rings and seals for separator bowl, inlet and outlet - Major Service Kit with parts for drive system, belt, bearings and friction pads • The System Manual includes detailed information in electronic or...

Abrir o catálogo na página 4