Deckhouse for Alfa Laval PureBallast 3 Ex
1 / 2Páginas

{{requestButtons}}

Excertos do catálogo

Deckhouse for Alfa Laval PureBallast 3 Ex - 1

Alfa Laval has developed standard deckhouses to fit Alfa Laval PureBallast 3 Ex ballast water treatment systems. Each deckhouse is delivered as a pre-assembled solution, including the PureBallast 3 Ex system and all piping inside the deckhouse, for easy integration into the vessel. For PureBallast 3 Ex system details, please refer to the Alfa Laval PureBallast 3 product leaflet. Application A large portion of the world’s tanker fleet uses submersible pumps, e.g. Framo pumps or the equivalent, to eliminate the need for a pump room and maximize space for the transport of product. This poses challenges when installing a ballast water treatment system, as it means there is no internal space available. A deckhouse for PureBallast 3 Ex offers a solution when the pump room is lacking or offers too little space for the installation. Benefits • Pre-assembled PureBallast 3 Ex system in standardized deckhouse • Durable construction with marine-approved steel (Grade A with 3.2 certificates) • Climate regulation through integrated HVAC • DNV-GL type approval covering both deckhouse and treatment system • Possibility to transport the deckhouse in a pallet-wide high cube container (40’/20’/10’) • Full backing from Alfa Laval’s global service organization Configuration The flow-related components of the PureBallast 3 Ex system (UV reactor, filter and CIP unit) are contained within the deckhouse, while the lamp drive cabinet and control cabinet are installed outside the deckhouse and within the vessel’s safe zone. Safety classification All components and wiring inside the deckhouse are classified for use in hazardous areas in accordance with the IEC 60079 series of standards: • Zone 1 • Explosion group IIC • Temperature class T4 (135°) Type approval The standard deckhouse configuration, including the PureBallast 3 Ex system, is type approved by DNV

Abrir o catálogo na página 1
Deckhouse for Alfa Laval PureBallast 3 Ex - 2

Deckhouse construction Side, front and aft: 8 mm coated steel, Grade A with 3.2 certificates Top and bottom: 5 mm coated steel, Grade A with 3.2 certificates Insulation: 50 mm, walls and ceiling Scope The standard deckhouse scope of supply includes the following: • Deckhouse HVAC - Electrically driven ventilation fan - Heater • Exterior lighting - Waterproof, seawater-resistant marine-type lamps • Interior lighting - 230 V fluorescent lamps with Ex approval - 24 V emergency lights integrated into the standard lamp units • Fire detection installation - System of heat and smoke detectors...

Abrir o catálogo na página 2

Todos os catálogos e folhetos Alfa Laval Mid Europe

  1. i-40D

    4 Páginas

  2. PureBilge

    20 Páginas

  3. Vibration dampers

    2 Páginas

  4. F-152

    4 Páginas

  5. AlfaBlue Junior DG

    16 Páginas

  6. EPC 60 Retrofit

    2 Páginas

  7. PureNOx Prime

    4 Páginas

  8. LPG carriers

    2 Páginas

  9. LNG carriers

    2 Páginas

  10. PureNOx

    2 Páginas

  11. Marine Essentials

    100 Páginas

  12. Fincoil Solar Max

    10 Páginas

  13. Aalborg TFO

    10 Páginas

  14. Aalborg OC

    2 Páginas

  15. Aalborg D

    2 Páginas

  16. Aalborg KBE

    2 Páginas

  17. Compabloc

    4 Páginas

  18. AlfaBlue BXM/BXD

    2 Páginas

  19. Alfa-V ACV

    2 Páginas

  20. PureSOx

    16 Páginas

  21. PureDry

    4 Páginas

  22. PureBallast 3.0

    6 Páginas

  23. CB100 / CBH100

    2 Páginas

  24. Alfa Laval AOT 3F

    2 Páginas

  25. AlfaRex - TM20

    2 Páginas

  26. AlfaDisc

    2 Páginas

  27. AlfaCond range

    2 Páginas

  28. Eliminator CCU

    4 Páginas

  29. MIB 303

    4 Páginas

  30. EMD00062EN Emmie

    2 Páginas

  31. PureBilge system

    38 Páginas

  32. Here30_ENG.pdf

    36 Páginas

Catálogos arquivados