ACO Marine product catalogue
1 / 36Páginas

ACO Marine product catalogue ACO GM-X and GM-X-VACplus drainage pipes and steel fittings for the marine industry

ACO Marine, as a division of the international ACO Group of companies with more than 4200 employees worldwide, offers proven galvanized and coated steel pipe product ranges GMX for drainage systems. Specially trained contacts in the ACO Marine sales department, can provide complete support and discuss any special requirements and bespoke designs. ACO Marine's experience in this field is confirmed through certification from renowned international test registers. The collection and disposal of wastewater is a decisive factor in shipbuilding, repair and conversion to ensure...

ACO GM-X and GM-X-VAC Table of Contents Material Drain pipes and fittings are manufactured from welded, one-time cold-drawn precision steel pipe in accordance with DIN 2394. Tensile strength: Rm 310-410 N/mm2 As a material, steel is practically properties: • unbreakable • dimensionally stable • heat and frost proof • favourable acoustic behaviour • non-combustible Thermal expansion With steel, thermal expansion is exceptionally limited. When a 1 metre piece of pipe is heated by 100°C, the length increase is 1.1 mm. The thermal expansion produced by the introduction of hot wastewater does...

The GM-X socket is a two-stage design. The seal guarantees great tightness between the pipe and is retained by the first socket stage. The second the socket, without the risk of the seal being stage centres the inserted pipe. compressed by its own or an outside load. The socket shape construction enables a solid, buckle-proof and rigid connection of pipes and mouldings to be made, and thus The GM-X seal is in the shape of a lip collar. It is inserted into the upper socket chamber. As a result of the other pipe end being pushed in, the sealing lips are forced against the inner wall...

ACO GM-X and GM-X-VAC Table of Contents The vacuum connection The vacuum installation with x-socket and GM-XVACplus sealing element, corresponds to installations of the standard GM-X sealing element. Therefore guaranteeing a trouble-free vacuum operation. The seal-tight value of the vacuum seal joint complies with DIN 86 281. In contrast to the aforementioned installation the GM-X-VACplus sealing element fills both socket stages. GM-X-VACplus seal The GM-X-VACplus sealing element allows the vacuum installations with „standard socket Type A1“. The GM-X-VACplus seal is in the shape of a lip...

ACO GM-X and GM-X-VAC Table of Contents All pipes and fittings are hot galvanized inside and out. The zinc coating is on average 400 g/m2 or 56 µ. It is impact-resistant and shock-proof. The zinc coating produces a cathodic protection of the cut edges thus preventing bottom rust. In addition, the insides of the pipes and fittings are given an alkydmelamine resin based plastic coating. Due to this internal coating of the pipes, frictional resistance on the internal surfaces is reduced and incrustation largely prevented. Together with the zinc coating, optimum corrosion protection is...

1. The seal is placed obliquely on the lower edge of the socket chamber. 2. Using your forefinger to press the seal to one side, push it into the socket chamber. 3. On releasing, the seal should pop into the socket chamber. (Adjust where necessary) Note: The outside seal edge collar must rest on the socket rim. Undoing the socket joint The insertion pipe is heated around the socket with a heat source until the pipe can be pulled out of the socket. When re-assembling, the seal must be changed. Pipe fixing For horizontally mounted pipes, the dead weight of the pipe plus the possible water...

ACO GM-X and GM-X-VAC Table of Contents Production monitoring GM-X drain pipes and fittings are subject to production monitoring by monitoring by a certified institute. GM-X seals are also subject to production monitoring by a certified institute. Quality management GM-X drain pipes and fittings are subject to production in accordance to DIN EN ISO 9001:2000. Certification GM-X pipes and special fittings are certified by all leading test registers. This affirms their high operational safety.

ACO GM-X and GM-X-VAC Table of Contents Delivery range overview GM-X sockets DN 40 to DN 250 Pipes with 1 socket Double sockets Pipes with 2 sockets Push-in sockets with long socket Cleaning pipes Angle bends with normal or short socket Pipe bridges Reduced angle bend with normal or short socket Drain traps Tank fittings Wall closet bends 90° for vertical mounting Forked T-pieces Connections threaded Bends with calming section Angle bends threaded Single branches Red. single branches Concentric transition pipes Double branches Red. double branches Transition pipes eccentric Double branches...

For pipes and fittings with 2 sockets both sockets are the same design Special nominal widths for GM-X WC connections and prefabrication GM-X Plug-in connection Socket DN 40-200 with seal GM-X -VACplus Plug-in connection Socket DN 250 with set of seal Socket DN 40-70 with seal

ACO GM-X and GM-X-VAC Dimensions and weights Order For example: If your selection is X = 1000 (E01 100), DN = 125 (125), than Order number is E01 100 125

GM-X drain pipes with one socket 1 A in acc. to EN 1123 form B1 GM-X drain pipes with two sockets 1 A in acc. to EN 1123 form B2 Vacuum installation in DN 40, DN 50, DN 70 with special GM-X-VACpIus sealing element and standard x-socket piping system

Bends Bends in acc. to EN 1123 form C1 *Attention Please note, that all shaped components with bends due to production-engineering reasons. Design data is available upon request. Vacuum installation in DN 40, DN 50, DN 70 with special GM-X-VACplus sealing element and standard x-socket piping system

ACO GM-X and GM-X-VAC Dimensions and weightsAngle bends Angle bends in acc. to EN 1123 form E1 ‘Attention Please note, that all shaped components with the bend share varies due to production-engineering reasons. Design data is available upon request. Vacuum installation in DN 40, DN 50, DN 70 with special GM-X-VACplus sealing element and standard x-socket piping system