Catálogos >
3M >
OEM Polyurethane Glass Adhesive Sealant 590

OEM Polyurethane Glass Adhesive Sealant 590
1 / 7Páginas

Excertos do catálogo

OEM Polyurethane Glass Adhesive Sealant 590 - 1

OEM Polyurethane Glass Adhesive Sealant 590 Technical Data Product Description 3M™ OEM Polyurethane Glass Adhesive Sealant 590 is a one component, fast curing adhesive which forms a rigid yet elastic permanent bond. 3M 590 bonds to a wide variety of materials including glass, acrylic / PMMA, polycarbonate, and many other materials. Features/Advantages Feature 3M™ OEM Polyurethane Glass Adhesive Sealant 590 • No mixing • Simplifies production Bonds dissimilar materials • Gives design flexibility Adheres to materials commonly used in vehicle window bonding • Multiple uses and design flexibility High strength • Provides long lasting bonds Fast curing • Speeds production Higher modulus / High Shore A Hardness Application Ideas • Ideal for bonding • Gives high strength bonds 3M™ OEM Polyurethane Glass Adhesive Sealant Specialty Vehicle X Bonds glass and plastics commonly used as windows and windshields.

Abrir o catálogo na página 1

OEM Polyurethane Glass Adhesive Sealant 590 - 2

3M™ OEM Polyurethane Glass Adhesive Sealant 590 Technical Data Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Properties 3M™ OEM Polyurethene Glass Adhesive Sealant 590 Shore A Hardness (ASTM C661) Tensile Strength (ASTM D412) Elongation at Break (ASTM D412) 100% Modulus (ASTM D412) Specific Gravity Thixotropic paste Application Temperature Water and salt spray resisteance Shearing resistance at 5 hours /23°C/50%RH (Ford SAE J 1529) Shearing resistance at 7 days /23°C/50%RH (Ford SAE J...

Abrir o catálogo na página 2

OEM Polyurethane Glass Adhesive Sealant 590 - 3

3M™ OEM Polyurethane Glass Adhesive Sealant 590 Performance Data Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Heat Resistance: Long term exposure to temperatures greater than 212°F (100°C) will decrease tensile strength over time. Do not use these products in applications where the temperatures will continuously exceed 212°F (100°C). Product Certifications and Listings 3M™ OEM Polyurethene Glass Adhesive Sealant 590 Federal Motor Vehicle Safety Standard Crash Test FMVSS 212...

Abrir o catálogo na página 3

OEM Polyurethane Glass Adhesive Sealant 590 - 4

3M™ OEM Polyurethane Glass Adhesive Sealant 590 Directions for Use (continued) Window Bonding Application: Supplies: • 3M™ OEM Polyurethane Glass Adhesive Sealant 590 in cartridges or 600 ml sausage packs • Solvent or non-greasy cleaner • Appropriate 3M Primer matched to the substrate: Fritted Glass 3M™ Fritted Glass Primer P590 Plain Glass 3M™ Teak & Glass Primer P595 PMMA 3M™ Plastic Primer P591 Fiberglass 3M™ Plastic Primer P591 Metal 3M™ Fritted Glass Primer P590 or 3M™ Metal Primer P592 • Wool dauber(s) for 3M Primer application • Applicator gun • Nozzle(s) • Glass or plastic...

Abrir o catálogo na página 4

OEM Polyurethane Glass Adhesive Sealant 590 - 5

3M™ OEM Polyurethane Glass Adhesive Sealant 590 Directions for Use (continued) Loading the applicator gun: make sure the applicator is set up with correct plunger attachment for cartridge or sausage pack. Cartridge: Puncture seal in the center of the nozzle connection on top and remove the pull-tab seal at the bottom of the cartridge. Load into applicator and fix retaining ring (if applicable). Attach the nozzle and cut to desired size and shape. Sausage Pack: Make a 1" slit close to the crimp on one end of the sausage pack. Load the sausage pack into the applicator barrel (slit side out)....

Abrir o catálogo na página 5

OEM Polyurethane Glass Adhesive Sealant 590 - 6

3M™ OEM Polyurethane Glass Adhesive Sealant 590 Directions for Use (continued) Typical Curing Time: Time (Hours) to Reach Overlap Shear Strength Time (hr) Note: Data should be considered representative or typical only and should not be used for specification purposes. Cleanup: While sealant is still soft, cleaning can be done with the same solvents used for surface preparation. Avoid cleaning with alcohol as it will interfere with the curing process. If sealant is already cured, removal is done mechanically with razor knife, piano wire, sanding or 3M™ Scotch-Brite™ Molding Adhesive and...

Abrir o catálogo na página 6

OEM Polyurethane Glass Adhesive Sealant 590 - 7

3M™ OEM Polyurethane Glass Adhesive Sealant 590 Precautionary Information Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501. Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Many factors beyond 3M’s control and uniquely within user’s knowledge...

Abrir o catálogo na página 7