Catálogos >
3M >
3M™Perfect-It™Denibbing Polish, PN 33272, 39063

3M™Perfect-It™Denibbing Polish, PN 33272, 39063
1 / 10Páginas

Excertos do catálogo

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 1

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 Safety Data Sheet Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: Issue Date: Version Number: Supercedes Date: SECTION 1: Identification 1.1. Product identifier 3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 Product Identification Numbers 60-4550-6938-9, 60-4550-6939-7 1.2. Recommended use and restrictions on use Recommended use Automotive, Polish 1.3. Supplier’s details MANUFACTURER: DIVISION: ADDRESS: Telephone: 3M Automotive Aftermarket 3M Center, St. Paul, MN 55144-1000, USA 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Skin Sensitizer: Category 1. 2.2. Label elements Signal word Warning Symbols Exclamation mark | Pictograms

Abrir o catálogo na página 1

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 2

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 Hazard Statements May cause an allergic skin reaction. Precautionary Statements General: Keep out of reach of children. Prevention: Avoid breathing dust/fume/gas/mist/vapors/spray. Wear protective gloves. Contaminated work clothing must not be allowed out of the workplace. Response: IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Specific treatment (see Notes to Physician on this label). Disposal: Dispose of contents/container...

Abrir o catálogo na página 2

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 3

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects. 4.3. Indication of any immediate medical attention and...

Abrir o catálogo na página 3

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 4

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 Avoid breathing of dust created by cutting, sanding, grinding or machining. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wash contaminated clothing before reuse. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) 7.2. Conditions for safe storage...

Abrir o catálogo na página 4

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 5

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 Respiratory protection Half facepiece or full facepiece air-purifying respirator suitable for particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Liquid General Physical Form: Purple Liquid Odor, Color, Grade: No Data Available Odor threshold No Data Available Melting point 212 ºF Boiling Point Flash point > 93 °C (200 °F) Flash Point No Data Available Evaporation rate...

Abrir o catálogo na página 5

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 6

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 Strong acids 10.6. Hazardous decomposition products Substance None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present...

Abrir o catálogo na página 6

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 7

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 Ethylene Oxide, Polymer with Ethylenediamine and Propylene Oxide Data not available or insufficient for classification ATE = acute toxicity estimate Skin Corrosion/Irritation Name Dodecamethylcyclohexasiloxane Decamethylcyclopentasiloxane Aluminum Oxide Ethylene Oxide, Polymer with Ethylenediamine and Propylene Oxide Species Rabbit Rabbit Value No significant irritation Data not available or insufficient for classification No significant irritation Data not available or insufficient for classification Serious Eye Damage/Irritation...

Abrir o catálogo na página 7

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 8

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 Aluminum Oxide Ethylene Oxide, Polymer with Ethylenediamine and Propylene Oxide Data not available or insufficient for classification Data not available or insufficient for classification Target Organ(s) Specific Target Organ Toxicity - single exposure Name Target Organ(s) Dodecamethylcyclohexasil oxane Decamethylcyclopentasilox ane Aluminum Oxide Test Result Exposure Duration Exposure Duration 28 days Data not available or insufficient for classification Data not available or insufficient for classification Data not available or...

Abrir o catálogo na página 8

3M™Perfect-It™Denibbing Polish, PN 33272, 39063 - 9

3M™ Perfect-It™ Denibbing Polish, PN 33272, 39063 01/24/14 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Incinerate in a permitted waste incineration facility. As a disposal alternative, Dispose of waste product in a permitted industrial waste facility. Proper destruction may require the use of additional fuel during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable...

Abrir o catálogo na página 9