1. Catalogs
  2. Zoltec
  3. ZOLTEK™ PX35 Continuous Tow

ZOLTEK™ PX35 Continuous Tow

ZOLTEK™ PX35 Continuous Tow

ZOLTEK™ PX35 Continuous Tow

Product catalog summary
Description: ZOLTEK PX35 continuous carbon fiber is produced from a polyacrylonitrile (PAN) precursor, offering consistent yield and mechanical properties. It is designed for efficient composite material manufacturing, available in various sizing formats compatible with standard resin systems.
Recommended Applications: Suitable for any component benefiting from carbon fiber composites, including wind energy, automotive, petroleum, aviation, marine, industrial, transportation, medical, and sports sectors.
Material Overview: Key properties include a tensile strength of 4,137 MPa, tensile modulus of 242 GPa, elongation of 1.5%, electrical resistivity of 0.00155 ohm-cm, density of 1.81 g/cc, fiber diameter of 7.2 microns, and carbon content of 95%.
Typical Packaging: The product is wound on a 3” x 11” cardboard spool, sealed in heat shrink covering, and boxed. Spool dimensions vary slightly based on length, with specific allowances for splices.
Certification: Manufactured according to ZOLTEK’s standards, each shipment includes a Certificate of Conformance. Approved by DNV-GL for wind energy applications (Approval No. WP 1030012 HH).
Safety: Users should consult the Material Safety Data Sheet (SDS) before using the product.
See more

Catalog excerpts

ZOLTEK™ PX35 Continuous Tow-1

Technical Datasheet ZOLTEK™ PX35 Continuous Tow Commercial Carbon Fiber for Industrial Applications DESCRIPTION ZOLTEK PX35 continuous carbon fiber is manufactured from polyacrylonitrile (PAN) precursor. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user the ability to design and manufacture composite materials with greater confidence and allows for efficient and fast buildup of carbon fiber reinforced composite structures. ZOLTEK PX35 50K fibers are available with a variety of sizing formats for different composite processing methods and for compatibility with a wide range of standard resin systems. ZOLTEK quality focuses on spool to spool consistency yielding low coefficients of variation. Wind energy, automotive, petroleum production, aviation, marine, industrial, other transportation, medical (including X-ray), sports and recreation, etc. Any article or component benefiting from the unique properties of carbon fiber composites. MATERIAL OVERVIEW Tensile Strength Tensile Modulus Fiber Diameter Carbon Content Textile Units Spool Weight Spool Length Elongation Electrical Resistivity Density The properties listed in this datasheet do not constitute any warranty or guarantee of values. This information should only used for the purposes of material selection. Please contact us for more details. ZOLTEK™ PX35 ZOLTEK Corporation | 3101 McKelvey Road | Bridgeton, MO 63044 P: 314-291-5110 | F: 314-291-8536 | www.zoltek.com

 Open the catalog to page 1
ZOLTEK™ PX35 Continuous Tow-2

Technical Datasheet ZOLTEK™ PX35 Continuous Tow Commercial Carbon Fiber for Industrial Applications TYPICAL PACKAGING Wound on a 3” x 11” (7.6 cm x 28 cm) cardboard spool, sealed in heat shrunk covering, and placed in cardboard box; two splices are permitted per every 1,500m spool and five per every 3,000m spool. ZOLTEK PX35 Continuous Tow is manufactured in accordance with ZOLTEK’S written and published data. A Certificate of Conformance is provided with each shipment. Spool outside diameter: » 1,500 m: 180-185 mm x 255-260 mm » 3,000 m: 235-245 mm x 255-260 mm SAFETY Obtain, read, and understand...

 Open the catalog to page 2

All Zoltec catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.