PRODUCT SPECIFICATION DYNAMIC TRIM CONTROL SYSTEM SERIES S

PRODUCT SPECIFICATION DYNAMIC TRIM CONTROL SYSTEM SERIES S Part number: 1010130 Release: R1M, October 2019 Language: English www.zipwake.com Copyright © 2019 Zipwake AB, Sweden. All rights reserved.

TABLE OF CONTENTS 1 INTRODUCTION 1.1 1.2 MOTION CONTROL FEATURES PRODUCTS AND PARTS OVERVIEW 2.1 KIT BOX CONTENTS 2.2 SPECIFICATIONS 2.3 ORDERING DATA CONTROL PANEL 3.1 FEATURES 3.2 SPECIFICATIONS 3.3 INTERFACES 3.4 DIMENSIONS 3.5 ORDERING DATA 4.1 FEATURES 4.2 SPECIFICATIONS 4.3 ORDERING DATA 4.4 DIMENSIONS DISTRIBUTION UNIT 5.1 SPECIFICATIONS 5.2 CONNECTORS 5.3 DIMENSIONS 5.4 ORDERING DATA 6.1 SPECIFICATIONS 6.2 ORDERING DATA CONTROL PANEL ALU FRAME 7.1 SPECIFICATIONS 7.2 ORDERING DATA CONTROL PANEL COVER 8.1 SPECIFICATIONS 8.2 ORDERING DATA CONTROL PANEL GIMBAL BRACKET 9.1 SPECIFICATIONS 9.2...

1 INTRODUCTION The Dynamic Trim Control System Series S incorporates a state-of-the-art family of durable, fast-acting Interceptors and unique 3D controls which provide the driver with unmatched, user-friendly, intuitive and precise control of running trim, heel or heading. The system is fully automatic and significantly enhances the boat’s performance, fuel economy, comfort and safety. KEY FEATURES COMFORT AND SAFETY Dynamically eliminates uncomfortable and dangerous boat pitch and roll. PERFORMANCE AND FUEL ECONOMY Automatically minimizes wave resistance and saves fuel. INTUITIVE AND PRECISE...

MOTION CONTROL FEATURES Mode Motion Feature Active roll control Coordinated turn Pitch-offset control with quick save Easy manipulation of pitch control curve Basic pitch control curve from boat dimensions Advanced turn recognition Curve-based pitch control Automatic Easy sensitivity control Auxiliary steering, controllable by other onboard system List control Speed-progressive control wheel Trim control Speed-progressive control wheel Steering control (calm sea or emergency steering) Speed-progressive control wheel For details, refer to the Operator’s Manual. ZIPWAKE DYNAMIC TRIM

1.2 PRODUCTS AND PARTS OVERVIEW Zipwake products and parts come as Kit Boxes, accessories or spare parts. Kit Box contents Kit Box Part No. Control Panel S with Standard Cable 7 M Distribution Unit S with Power Cable 4 M Interceptor 300 S with Cable 3 M & Cable Covers Interceptor 450 S with Cable 3 M & Cable Covers Interceptor 600 S with Cable 3 M & Cable Covers Interceptor 750 S with Cable 3 M & Cable Covers Interceptor 450 S V13 with Cable 3 M & Cable Covers Interceptor 450 S V16 with Cable 3 M & Cable Covers Interceptor 450 S V19 with Cable 3 M & Cable Covers Interceptor 450 S V22 with Cable...

Control Panel S with Standard Cable 7 M Distribution Unit S with Power Cable 4 M Interceptor 300 S Chine Port side with Cable 3 M & Cable Covers Interceptor 300 S Chine Starboard side with Cable 3 M & Cable Covers Interceptor 450 S Chine Port side with Cable 3 M & Cable Covers Interceptor 450 S Chine Starboard side with Cable 3 M & Cable Covers Interceptor 300 S Intermediate with Cable 3 M & Cable Covers IT300-S CHINE PORT FRONT Interceptor 300 S Chine Port side Front IT300-S CHINE STBD FRONT Interceptor 300 S Chine Starboard side Front IT450-S CHINE PORT FRONT Interceptor 450 S Chine Port side...

DISTRIBUTION UNIT 1 x Distribution Unit with Power Cable 4 m CONTROL PANEL 1 x Control Panel with Standard Cable 7 m 2 x Interceptors with Cable 3 m & Cable Covers Operator’s Manual Warranty Card Installation Guide Drill Templates Operator’s Quick Guide Startup Checklist Any base installation can be expanded with up to two extra pairs of Series S interceptors, thus allowing a total of six interceptors without any need for additional connectors or power supply. See section 1.2 for details of the contents of each Kit Box. 2.3 ORDERING DATA Model Part No. ZIPWAKE DYNAMIC TRIM CONTROL SYSTEM - SERIES...

3 CONTROL PANEL Zipwake’s stylish control panel is carefully designed to be user-friendly and intuitive to allow the driver to focus on the right thing – enjoying the boat ride! The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button. In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller automatically ensure dynamic elimination of uncomfortable and dangerous boat pitch and roll....

2.4” IPS color TFT LCD, 320 x 240 pixels, double-sided, anti-reflection coated window Internal sensors 5 Hz GPS, 3D Gyro, 3D Accelerometer, Ambient light Supply voltage Power consumption Operating temperature Storage temperature Waterproof rating Compass safe distance Surface, flush or gimbal bracket mount • USB Device Port (Type A) • USB Host Port (Type B) • External GPS (NMEA 0183 / RS232 auto baud-rate sensing) 3.5 ORDERING DATA Model 2011238 with Standard Cable 7 m • Available as a spare part ZIPWAKE D

4 INTERCEPTORS Series S is a product family that includes four straight, four V-shaped, four chine and one intermediate interceptor. This first-ever modular design made for mass production makes the interceptors durable, affordable and perfectly adapted to any planing or semi-planing boat between 6 m and 15 m (20-50 ft). All components have been meticulously engineered to withstand impact and avoid water ingress, minimizing the risk of costly maintenance and downtime. Interceptor or blade actuation takes place by way of a calibration-free submersible electric servo in the interceptor unit. Its...

V-shaped interceptors for centerline mounting V-shaped interceptors for centerline mounting are perfect for filling the gap between twin outboards or sterndrives, as well as dual propeller tunnels. The four V-shaped models cover deadrise angles effectively between 11 to 24 degrees. Centerline mounted interceptors can be included in new installations, or retro-fitted to already installed systems. ZIPWAKE DYNAMIC TRIM CONTROL SYSTEM - SERIES S