The Zeta Deck Caulking 1200 -FC is a one-part moisture curing system. Zeta Deck Caulking 1200-FC has very high resistance to UV, and a high elongation and good adhesion. Zeta Deck caulking 1200-FC can be supplied in three different colors: Black, Gray and White. Zeta Deck Caulking 1200 - FC Black is Primer free - Zeta recommend 550 Primer for Zeta Deck Caulking 1200-FC Gray & White. Apply the Zeta Deck Caulking 1200 -FC with a manual or pneumatic gun. Lay the bed carful in the bottom of the seam, let the caulking work itself up the top of the seam, spoon the seam, and leave enough caulking on top for curing. It is important the seam is sanded, vacuum cleaned and free from dust. Before caulking, clean the seam using a clean cotton cloth with isopropyl or acetone. Run the cloth in the seam to make sure the seam is cleaned correctly. The Zeta Deck Caulking cure 3 mm pr day, deepends on temperature. Leave the caulking at least 36 to 48 hours before sanding. If the deck is a re seam and there are doubts if the deck seam is total cleaned and free from old caulking, Zeta recommend using the Zeta 550 primer. Most wood material can be caulked without primer. Surface must be vacuum cleaned, dry, and free from grease. GRP, composite, plywood, metal and aluminum must be primed and sanded with grit 40. Keep the Zeta Deck Caulking 1200 in a controlled environment, to maximize the shelf life. Temperature between 10 C° and 30 C°. 600 ml sausage, 12 in a box. Zeta advises to read the SDS and carefully follow the Shelf life 12 months from manufacture date. Zeta Marine Group ApS, Gotlandsvej 4 DK 5700 Svendborg Tel +45 62201312 www.zetamarinegroup.com