TDS AP-100
2Pages

Teakdecking GENERAL, ALL-PURPOSE TDS AP-100 All Purpose Epoxy is a general purpose, high strength adhesive for general marine bonding applications. Ideal for installing plugs in teak decks or bonding wood or fiberglass • Excellent bond strength • Excellent wet-out of bonding surfaces • Flexible strength resists shock and twist • Translucent color blends well with surrounding surfaces • 1:1 mix ratio for easy mixing Surface Preparation: All surfaces must be clean, dry, and free of any dirt, grease, wax, etc., before beginning any surface preparation. Regardless of the substrate, it is mandatory that a sample adhesion test be performed to the primed/sealed surface at least 24 hours prior to the final glue-down. • Sandblast or grind to clean white metal per SSPC- • Wash with Metal Prep. • Follow primer instructions to clean surface • Apply 2-3 coats of a commercially approved epoxy primer such as Awl-Grip High-Build, Devoe Epoxy Primer or equivalent, adequately filling the blast • Sandblast or grind with 24 grit disc pads to a • Follow primer instructions to clean surface • Follow with a vinyl wash primer or Alumaprep

• Follow by a mil/spec zinc or strontium chromate corrosion-inhibiting primer • Follow with AwlGrip High-Build epoxy, Devoe Epoxy Primer, or equivalent. • Grind with 36-40 grit paper until no shiny surface • Wipe down with acetone. • Scuff with 36-40 grit paper. • Do not use polyester resin or wood sealers that contain oils. Mixing Instructions: • Stir both A & B components before combining • Mix by volume: 1 part base resin with 1 part • Mixing MUST be thorough to ensure a good cure. Scrape the sides of the container until you have achieved a uniform color with no •Application is not...