ESC1
4Pages

VINGTOR^STENTOFON by ZENITEL GROUP 1023000000 ESC1 Exigo System Controller DESCRIPTION • Control and routing of audio channels • 115 - 230 VAC primary power and 24 - 48 VDC secondary power • Redundant Ethernet connections • Digital audio processing • Receives, handles and stores fault messages from the system • Interface to PABX and iPBX • Interface to telecom management, safety, automation and security systems • Voice message storage • Programmable alarm generator • 6 configurable control outputs • 6 configurable control input The system controller is based on IP technology, giving it extreme flexibility, superb audio quality and multiple possibilities for integration. The system controller handles routing and prioritization of up to 32 simultaneous audio channels in the system where audio can be distributed from up to 150 audio inputs to up to 250 zones. The system controller features a display where status and faults can be viewed. This display also allows configuration of simple parameters. The system controller monitors and receives status information from every component in the system. Faults are time stamped, and presented in chronological order on the display. Buttons allow an operator to acknowledge and reset faults. The network connection to every component in the system is monitored, so a defect switch or broken cable will be detected just as reliably and fast as any other fault in the system. The system controller also acts as the system's alarm generator and audio message storage. The embedded alarm generator features a set of the most common alarm tones, but can also be programmed to support custom alarm tones and patterns. Stored voice and audio messages is easily uploaded to the system controller as standard wav files. The system controller's control inputs/outputs and audio inputs can be used locally by the system controller (e.g. for PTT and audio from a handheld microphone) or can be controlled by the system (e.g. audio input for background music). www.zenitel.com info@zenitel.com Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Vingtor-Stentofon products are developed and marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice. ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend. Zenitel - All rights reserved.

SPECIFICATIONS MECHANICAL Dimensions (HxWxD) Shipping Weight USER INTERFACE Display Rotary selector button with push-to-select Primary power, Secondary power, Fault, Alarm, Disabled, In command ENVIRONMENTAL Operating temperature Operating humidity Storage temperature Storage humidity ELECTRICAL Primary Connector Nominal input Secondary power Connector Pluggable and lockable terminal Nominal input Power consumption NETWORK Ethernet 2 x 10BASE-T, 100BASE-TX, Auto negotiation, Auto MDIX Protocols IPv4 (with DiffServ), TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, STENTOFON CCoIP® , NTP VLAN(IEEE...

Input impedance Phantom supply (optional) CONTROL INPUTS AND CONTROL OUTPUTS Control Inputs Closing contact, monitored Control Outputs Relay outputs: (COM, NO,NC) Max recommended levels: 3A, 100Vdc, 125Vac, switching 60W/125VA Fault relay Relay outputs: (COM, NO,NC) Max recommended levels: 3A, 100Vdc, 125Vac, switching 60W/125VA CERTIFICATIONS Immunity TECHNICAL DIMENSIONS Created: 11.07.2014, updated: 08.05.2020 www.zenitel.com Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein....

Created: 11.07.2014, updated: 08.05.2020 www.zenitel.com Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Vingtor-Stentofon products are developed and marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice. ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary...