- Catalogs
- Youcan Robotics (Shanghai) Co.,Ltd
- BW Space Pro Max User Manual
BW Space Pro Max User Manual
BW Space Pro Max User Manual
Users must thoroughly read the manual, disclaimers, and safety instructions before using the BW Space Pro Max underwater drone. The product is intended for legitimate use only, and users are accountable for any misuse. Safety checks are essential before use, and the drone should not be operated in harsh environments or under the influence of substances. Minors require supervision, and privacy must be respected during operation.
The BW Space Pro Max features a 4K UHD camera, operates between -10°C and 40°C, and has a maximum speed of 3 knots. It includes a 9000 mAh battery with a 7-hour working time in low energy mode. Connectivity options include 2.4 GHz and 5.0 GHz WiFi frequencies, with a maximum transmission rate of 433 Mbps at 5.0 GHz.
Regular maintenance involves checking part durability, ensuring proper sealing with lubricant, and charging every three months. Use the provided charger and avoid water contact with connectors. After use, rinse the device with fresh water to prevent salt crystallization and ensure secure connections to avoid short circuits.
The BW Space Pro Max includes components such as the drone, WiFi repeater, remote controller, and tether winder. Proper installation and removal of parts like the handle and stand are crucial for waterproofing.
Instructions for charging the drone and WiFi repeater include using specific connectors and indicators for charging status. Fully charge the device before first use and periodically thereafter.
Connecting the drone to the WiFi repeater and mobile devices is done via the Oceaneye APP, which includes steps for WiFi connection, app setup, and troubleshooting tips.
The app allows control of the drone, viewing underwater footage, and managing settings like depth calibration and camera upgrades. It supports control and viewing modes, with features for photo and video management.
Safe shutdown and retrieval instructions emphasize disconnecting the tether to prevent battery drain.
Media can be exported to mobile devices or computers using the Oceaneye APP or Youcan Assistant software. Ensure important materials are saved before deletion from the drone's memory.
The remote controller includes components like the mobile phone holder and joystick settings. It features three joystick models, adjustable shooting angles, speed control, brightness, and zoom functions. Separate buttons are available for photo and video recording, and the mechanical arm can be controlled via the remote or app.
The remote controller charges via USB, with indicators showing charging status. A full charge is indicated when all lights turn red and stop flashing.
The remote controller pairs with a smartphone via Bluetooth. Ensure Bluetooth is enabled and the device is not paired with another phone. Location services should be enabled if issues arise.
Instructions for installing the mechanical arm include fixing the base and connecting cables.
For support, visit the Youcan Robotics website or contact customer service via email or phone.
Catalog excerpts
BW Space Pro Max Underwater Drone User Manual
Open the catalog to page 1
Contents Disclaimer and Safety Instructions Product List Product Overview Shut down and Retrieval Photos and Videos Exportation Remote Controller Technical Specifications
Open the catalog to page 2
Disclaimer and Safety Instructions Disclaimer l. In order to protect the legitimate rights and interests of users, please read carefully the instruction book, disclaimers and safety instructions provided with this product before using it. Please be sure to operate this product according to instruction book and safety instructions, and Youcan Robot (Shanghai) Co., Ltd. owns the right to revise the above items. 2. Once you start using this product, you shall be deemed to have read, understood,recognized and accepted all terms and contents of the instruction book, disclaimers and safety instructions....
Open the catalog to page 3
5. In using this product, please ensure your own safety and wear the life jacket (self-provided), and keep away from dangerous areas and dangerous marine life, such as the tiger shark and the great white shark. 6. When the product gives the low battery notification, you should stop using the device in time. Please do not panic in case of incidents, such as outages, broken ropes, etc. BW Space Pro Max will automatically come to the surface by buoyancy. 7. Minors shall be accompanied by parents to use products or accessories to avoid dangers. 8. Please do not use this product to take pictures of...
Open the catalog to page 4
BW Space Pro Max Underwater Drone WiFi Repeater Adapter Cable Wrench and other Tool Kits (used when installing the tether) Tether Winder Remote Controller Adapters and Mounting Bases Sealing Lubricant and Sealing Ring 03
Open the catalog to page 5
Product Overview BW Space Pro Max Protection wing Protection wing Vertical propeller Communication/ Charging interface Vertical propeller Vertical propeller Safety bolt Camera Horizontal propeller Horizontal propeller WiFi Repeater Working indicator Power switch LAN WAN Cable connector Battery indicator Type-c charging port Charging indicator 04
Open the catalog to page 6
Cautions 1. WiFi repeater can NOT operate in the water,so please do not put it into water. 2. WAN interface: Network interface, providing network signal for underwater live broadcast. LAN interface: can be connected to computers, notebooks and other equipment. 3. Description of the status of the power indicator of the WiFi Repeater: when the power is lower than 25%, the red light is on Tether Winder M8 screw nut M8 cleat nut Stand Magnet attachment point Bearing
Open the catalog to page 7
1. M8*1 gasket into the M8 screw from the A side and insert it into the central hole of the tether winder; 2. Load the M8*1 gasket and bearing from the B side, and then use the M8 screw nut to lock; 3. Install the bracket on the B side, and use a wrench to lock the M8 cleat nut. Tutorial Video 【How to install and remove the handle】 • Insert the handle into the installation hole, insert and press the plastic buckle on the inside of the winder; when removing, lift the buckle from the inside of the winder, and then remove the handle. 【WiFi Repeater fixing method】 • Align the four bases of the WiFi...
Open the catalog to page 8
Instructions of Sealing Lubricant and Sealing Ring • Apply sealing lubricant evenly to the sealing ring of communication/ charging interface and thread before using. 【The functions of sealing lubricant】 1. Seal the drone tightly and enhance the waterproof performance; 2. Act as a lubricant, making it easier to access the plug and reduce the loss of the sealing ring; Cautions The sealing ring is the spare part of the drone connector. When the original sealing ring is damaged, please replace it in time to maintain waterproof. Preparation Charging 【Charging of BW Space Pro Max
Open the catalog to page 9
Insert the connector of the charger with 4-pin jacks into the BW Space Pro Max charging port, the power indicator turns red, indicating that charging is in progress; when the power indicator turns green, it indicates that the charging is complete. 【Charging of WiFi Repeater】 Please Turn off the Power when charging Connect the Type-c cable to the charging port of the WiFi Repeater, start charging, and the red indicator light will turn on; the indicator light will turn off, indicating that the charging is fully charged. Cautions 1. When connecting the device, please align the socket first, and...
Open the catalog to page 10
Please Fully Charge for the First Time Use Please Charge Once Every Three Months Download Oceaneye APP • Visit Youcan Robot website to download the Oceaneye APP： https://www.youcanrobot.com/servicesupport Cautions • The iOS system supports version 10.3 or above, and the Android system supports Android 6.0 or above; • Since the software is constantly updated and iterated, please go to the official website or download center to update the software version in time
Open the catalog to page 11
Connecting Connect the equipment 1. Insert the 4-pin jack connector of the tether into the BW Space Pro Max communication port, and the round hole connector into the WiFi Repeater, and activate the WiFi Repeater power button. The indicator light of the WiFi Repeater turns green, and the connection is complete. Cautions Buckle the anti-lost ring on the tether to the safety bolt at the tail of the drone to increase the tether's anti-fixation strength. Connect to WiFi Access the mobile phone WiFi connection interface, select Youcan-****-5G(Recommended) or Youcan-****, enter the password: 12345678....
Open the catalog to page 12
Open Oceaneye App Open the Oceaneye APP, select the BW Space Pro Max model, and click "Start". After the connection is successful, slide to the right to unlock, and the boot is successful. At this point, you can use the APP to control the underwater movement and shooting of the drone. Tips 1. When the tether is inserted into BW Space Pro Max, the drone will make a "beep beep" sound, which is a normal phenomenon, indicating that the power is normal; 2. If the APP connection fails, please confirm whether the access permission of the Oceaneye APP is enabled on the mobile phone: Android phone, open...
Open the catalog to page 13
Put the BW Space Pro Max into water Important tips 【Boot Upgrade】 When connected to the device, please perform steps to prevent the drone from being unusable due to incorrect operation, if Oceaneye APP interface prompts that the boot need to be upgraded. (Note: Please do not disconnect the tether of drone with the WiFi repeater in upgrading; After upgrading, please disconnect the tether in order to restart the device). 【Control system upgrade】 To continuously optimize the operative performance of BW Space Pro Max, we will upgrade the control system of BW Space Pro Max from time to time. When...
Open the catalog to page 14All Youcan Robotics (Shanghai) Co.,Ltd catalogs and brochures
BW Space User Manual104 Pages
BW Space Pro User Manual V431 Pages