Catalogs >
Yanmar Marine USA >
6LPA-STZP2 Series

6LPA-STZP2 Series
2Pages

Catalog excerpts

MARINE DIESEL ENGINES MARINE DIESEL ENGINES 4-stroke, vertical, water-cooled diesel engine 6LPA-STZP2 Series Configuration Maximum output at crankshaft 4-stroke, vertical, water ** 225 kW@3800 rpm cooled diesel engine Maximum output at crankshaft Displacement * 232 kW (315 mhp) / 3800 rpm 4.164 L ** 225 kW (306 mhp) / 3800 rpm 94 mm x 100 mm 211 kW (286.4 mhp) / 3682 rpm In-line, 4 valves per cylinder 4.164 L (254 cu in) Direct injection Continuous rating output at crankshaft Cylinders Combustion system 94 mm x 100 mm (3.70 in x 3.94 in) Turbocharged with intercooler 6 in line cylinders, 4- valves per cylinder Electric starting 12V - 2.5 kW Combustion system Direct injection Turbocharged with intercooler Fresh water cooling by centrifugal fresh water pump and Starting system Electrical starting 12 V - rubber impeller seawater pump 2.5 kW Lubrication system Alternator Direction Cooling system of rotation [crankshaft] Counterclockwise viewed from stern Fresh water cooling by centrifugal fresh water pump and rubber impeller seawater pump Aspiration Starting system Alternator Cooling system Enclosed, forced lubricating system Dry weight without gear 428 kg Enclosed, forced lubricating system Emission compliance EU: RCD 1 Counter clockwise viewed from flywheel side Lubrication system Direction of rotation (crankshaft) Engine mounting Rubber type flexible mounting Dry weight without sterndrive NOTE: Environmental EU RCD, US EPA Tier 2, BSO II, EMC & Marpol 73/78 Annex VI Fuel condition: Density at 15°C = 0.84 g/cm³; 1 kW = 1.3596 mhp = 1.3410 HP * Fuel temperature 25°C at the inlet of the fuel injection pump [ISO 3046-1] Engine mounting Rubber type flexible mounting ** Fuel temperature 40°C at the inlet of the fuel injection pump [ISO 8665: 2006] Technical data is according to ISO 8665: 2006/3046-1 NOTE: Fuel condition: Density at 15°C = 0.84 g/cm 3; 1kW = 1.3596 mhp = 1.3410 HP * Fuel temperature 25°C at the inlet of the fuel injection pump (ISO 3046-1) ** Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665 : 2006) DIMENSIONS (For detailed line-drawings, please refer to our web-site: www.yanmarmarine.com) Rear view Right side view 6LPA-STZP2 with ZT370 Sterndrive marine gear 6LPA-STZP2 with ZT370 Sterndrive www.yanmarmarine.com www.yanmarmarine.com Right side view 734.4 mm (28.9 in) Rear view

Open the catalog to page 1

Performance Curves (Output is according ISO 8665) PERFORMANCE CURVES Maximum output at prop shaft Propeller power curve 2,5 Crankshaft Speed min-1 Propeller power curve 2,5 Drive systems / DRIVE* MARINE GEARS Model Model Fuel Consumption Fuel Consumption gal/hr Maximum output at crankshaft Maximum output at prop shaft Fuel Consumption gal/hr Fuel Consumption L/hr Fuel Consumption L/hr Fuel Consumption Crankshaft Torque lb-ft Crankshaft Torque lb-ft Maximum output at crankshaft Crankshaft Torque Nm Crankshaft Torque Nm Output (crankshaft/propeller Output (crankshaft/propeller shaft) kW...

Open the catalog to page 2