Catalogs >
Yanmar Marine USA >
4LV Series - 150Z / 170Z / 195Z

4LV Series - 150Z / 170Z / 195Z
2Pages

Catalog excerpts

MARINE COMMON RAIL ENGINES Configuration Maximum output at crankshaft* Displacement Bore x stroke Cylinders Combustion system Low idle rpm Aspiration Starting sytem Alternator Cooling system Lubrication system Direction of rotation [crankshaft] Dry weight without gear** Emission compliance Engine mounting 4 in-line Direct injection with Denso common rail system 750 rpm Turbocharger with charge-air cooler Electric starting 12V - 2 kW Denso 12V - 130A Fresh water cooling by centrifugal fresh water pump Sea water cooling by rubber impeller seawater pump Enclosed, forced lubricating system Counterclockwise viewed from stern 332 kg [732 lbs] Rubber type flexible mounting NOTE: Fuel condition: Density at 15°C = 0.84 g/cm3: 1 kW = 1.3596 mhp = 1.3410 HP * Fuel temperature 40°C at the inlet of the fuel injection pump [ISO 8665: 2006] ** Including damper disk Technical data is according to ISO 8665: 2006 Rear view

Open the catalog to page 1

MARINE GEARS* Model Type Dry weight with propellers** Reduction ratio [fwd/rev] Propellor speed Direction of rotation viewed from the stern Lube oil specifications Dry weight engine with sterndrive Shift control Trim range Trailer limit *For other configurations, consult your local Yanmar distributor. **Dry weight includes cooler and brackets ACCESSORIES Standard Package • Through drive exhaust • Alternator 12V - 130A • VC10 Vessel Control System • Electronic CAN-bus control head • Set of flexible engine mounts • Fresh water expansion tank • Belt safety cover • Engine topcover for...

Open the catalog to page 2