Catalogs >
Yanmar Marine USA >
4JH45 Common Rail Series

4JH45 Common Rail Series
2Pages

Catalog excerpts

MARINE DIESEL ENGINES Configuration Maximum output at crankshaft Displacement Bore x stroke Cylinders Combustion system Aspiration Starting system Alternator Cooling system Lubrication system Direction of rotation [crankshaft] Dry weight without gear Emission compliance Engine mounting 4-stroke, vertical, water-cooled diesel engine * 33.1 kW@3000 rpm [45 mhp@3000 rpm] In-line Direct injection with Bosch common-rail system Natural aspiration Electric starting 12V - 1.4 kW 12V - 125A Fresh water cooling by centrifugal water pump and rubber impeller sea water pump Enclosed, forced lubricating system Counterclockwise viewed from stern 220 kg [485 lbs] Rubber type flexible mounting NOTE: Fuel condition: Density at 15°C = 0.84 g/cm3: 1 kW = 1.3596 mhp = 1.3410 HP * Fuel temperature 40°C at the inlet of the fuel injection pump [ISO 8665: 2006] Technical data is according to ISO 8665: 2006 Rear view

Open the catalog to page 1

PERFORMANCE CURVES Performance Curves (Output(Output is according ISO 8665) Performance Curves (Output is according8665)8665) Performance Curves is according ISO ISO Maximum output output atshaft shaft Maximum atoutput at prop shaft Maximum prop prop 6 25 6 PropellerPropeller power curve Propeller powerEngine Speed, rpm power curve curve Fuel Consumption at Prop. load exp. 3.0 Crankshaft Speed Speed min Crankshaft min Crankshaft Speed min Marine Gears/Drive Marine Gears/Drive Marine Gears/Drive Crankshaft Speed Speed min Crankshaft min Crankshaft Speed min -1 Crankshaft Speed Speed min-1 -1...

Open the catalog to page 2