Specification Datasheet - 6LPA-STZP2
2Pages

{{requestButtons}}

Catalog excerpts

Specification Datasheet - 6LPA-STZP2 - 1

MARINE DIESEL ENGINES MARINE DIESEL ENGINES 4-stroke, vertical, water-cooled diesel engine Maximum output at crankshaft ** 225 kW@3800 rpm 4-stroke, vertical, water cooled diesel engine 4.164 ltr * 232 kW (315 mhp) / 3800 rpm ** 225 kW (306 94 mm 3800 rpm mhp) / x 100 mm Configuration Displacement Maximum output at crankshaft Bore x stroke Cylinders Continuous rating output at crankshaft Combustion system Displacement Aspiration Bore x stroke Turbocharged with 94 mm x 100 mm (3.70 in x 3.94 in)intercooler Starting system Cylinders Electric starting cylinder 6 in line cylinders, 4- valves per 12V - 2.5 kW Alternator Combustion system Cooling system Aspiration Fresh water cooling by centrifugal fresh water pump and Turbocharged with intercooler rubber impeller seawater pump Electrical starting 12 V - 2.5 kW Starting system Lubrication system Enclosed, forced lubricating system Direction of rotation [crankshaft] Counterclockwise viewed from flywheel side Fresh water cooling by centrifugal fresh water pump and rubber impeller seawater pump Dry weight without gear 428 kg Enclosed, forced lubricating system EU: RCD Counter clockwise viewed from flywheel side US: EPA Tier2 428 kg (944 lbs) IMO: MARPOL 73/78 Annex VI EU RCD, US EPA Tier 2, BSO II, EMC & Marpol 73/78 Annex VI Rubber type flexible mounting Rubber type flexible mounting Cooling system Lubrication system Direction of rotation (crankshaft) Dry weight without sterndrive Environmental Engine mounting Engine mounting NOTE: Fuel condition: Density Density at 0.84 g/cm³; 1 kW =; 1.3596 mhp = 1.3410 HP NOTE: Fuel condition: at 15°C = 15°C = 0.84 g/cm 3 1kW = 1.3596 mhp = 1.3410 HP * *Fuel temperature 25°C at the inlet of the fuel injection pump (ISO 3046-1) Fuel temperature 25°C at the inlet of the fuel injection pump [ISO 3046-1] ** Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665 : 2006) ** Fuel temperature 40°C at the inlet of the injection pump [ISO 8665: 2006] Technical data is according to ISO 8665: 2006/3046-1 (For detailed line-drawings, please refer to our web-site: www.yanmarmarine.com) 6LPA-STZP2 with KM2P-1 marine gear Right side view 734.4 mm (28.9 in) Rear view Dimensions Dimensions

Open the catalog to page 1
Specification Datasheet - 6LPA-STZP2 - 2

MARINE DIESEL ENGINES Performance Curves Performance Curves (Output is according ISO 8665) Maximum output at crankshaft Maximum output at prop shaft Maximum output at prop shaft Propeller power curve 2,5 Crankshaft Speed min-1 Drive systems Crankshaft Speed min marine gears / drive Instrument panels New B-type Panel Instrument Panels 1-5 3 1-4 2 Function 1 Switch unit 1-1 Key Function switch for GLOW/OFF/ON/START (4-position switch) Function 1-2 Engine stop switch 1 Switch 1-Switch unit unit 1-3 Alarm buzzer (C.W. Temp., L.O. Pressure) 1-1 Key switch for GLOW/OFF/ON/START (4-position...

Open the catalog to page 2

All Yanmar Europe BV catalogs and brochures

  1. 6AYL series

    1 Pages

  2. CHS Marine

    26 Pages

  3. 4HAL2 series

    1 Pages

  4. 6CHL series

    1 Pages

  5. 6HAL2-TN

    1 Pages

  6. 4CHL series

    1 Pages

  7. 6AYEM

    4 Pages

  8. CHS RANGE

    26 Pages

  9. 2YM15 - SD25

    3 Pages

  10. 1GM10 - SD25

    3 Pages

  11. 3YM27A

    1 Pages

  12. 6EY17W

    1 Pages

  13. 6AYEM-ET

    28 Pages

  14. 6LY2A-UTP

    2 Pages

Archived catalogs

  1. 6SY-720

    2 Pages

  2. 6SY-650

    2 Pages

  3. 6BY2-260Z

    2 Pages

  4. 6LY3-STC

    2 Pages

  5. 6LY3-UTC

    2 Pages

  6. 6LY3-STP

    2 Pages

  7. 6LY3-UTP

    2 Pages

  8. 6LPA-STZP2

    2 Pages

  9. 4BY2-180Z

    2 Pages

  10. 4BY2-180

    2 Pages

  11. 8SY-900

    2 Pages

  12. 6CX-530

    2 Pages

  13. 6LY3-ETP

    2 Pages

  14. ZF Pod drive

    6 Pages