Catalogs >
Yanmar Europe BV >
Specification datasheet - 4JH4-TE

Specification datasheet - 4JH4-TE
2Pages

Catalog excerpts

MARINE DIESEL ENGINES 4-stroke, vertical, water-cooled diesel engine 4-stroke, vertical, water cooled diesel engine * 55.2 kW@3200 rpm Maximum output at crankshaft Continuous rating output at crankshaft Displacement Cylinders Bore x stroke system Combustion Cylinders Aspiration 4 cylinders, 4-valves per cylinder Turbocharged Combustion system Starting system Direct injection Electric starting 12V - 1.4 kW Alternator Aspiration Cooling system Starting system Fresh 1.4 kW Electric starting 12 V - water cooling by centrifugal water pump Lubrication system Cooling system Enclosed, forced water pump and rubber impeller sea water pump Fresh water cooling by centrifugal lubricating system Direction Lubricationof rotation [crankshaft] system Counterclockwise viewed from flywheel side Enclosed, forced lubricating system Maximum output at crankshaft Displacement Bore x stroke Dry weight without gear Direction of rotation (crankshaft) Environmental Dry weight without gear and rubber impeller sea water pump 207 kg Counter clockwise viewed from flywheel side 207 kg (456 lbs) Engine mounting Rubber type flexible mounts Rubber type flexible mounts Environmental Engine mounting NOTE: NOTE: Fuel condition: Density at 15°C = 0.84 g/cm 3; 1kW = 1.3596 mhp = 1.3410 HP 3 *Fuel condition: Density at 15°C = 0.84 g/cm ; injection1.3596 (ISO 8665) Fuel temperature 40°C at the inlet of the fuel 1 kW = pump mhp = 1.3410 HP * Fuel temperature 40° C at the inlet of / 3046 Technical data is according to ISO 8665 the fuel injection pump [ISO 8665] Technical data is according to ISO 8665: 2006/3046-1 Dimensions Dimensions (For detailed line-drawings, please refer to our web-site: www.yanmarmarine.com) Rear view Right side view 660.6 mm (26 in) OPTIONAL 616.1 mm (24.2 in) 333.1 mm (13.1 in) OPTIONAL ALTERNATOR 137 mm (5.4 in) 327.5 mm (12.9 in) incl. BELT COVER FUEL INLET www.yanmarmarine.com www.yanmar.eu 4JH4-TE with KM4A2 marine gear EN_DS4JH4-TE_0714 4JH4-TE with KM4A2 marine gear

Open the catalog to page 1

MARINE DIESEL ENGINES Performance Curves Maximum output at prop shaft Propeller power curve 2.5 Maximum output at crankshaft Crankshaft Torque lb-ft Fuel Consumption Output (crankshaft/propeller shaft) mhp Output (crankshaft/propeller shaft) kW Fuel Consumption gal/hr Performance Curves Marine Gears/Drive Model Type ZF30M parallel KM4A2 down angle:7º KMH4A down angle: 8º ZF25A down angle: 8º Mechanical multi Mechanical Hydraulic, wet Hydraulic, wet Marine Gears/drive disc wet cone clutch multi-disc multi-disc Dry weight 28 kg (61 lbs) 30 kg (66 lbs) 31 kg (68 lbs) 30 kg (66 lbs) Model KM4A2...

Open the catalog to page 2