Catalogs >
Yanmar Europe BV >
6BY2-260Z

6BY2-260Z
2Pages

Catalog excerpts

In line, 4-stroke cycle, water cooled diesel engine Maximum output at crankshaft * Continuous rating output at crankshaft 147 kW (198 mhp) 3600 rpm 6, Common Rail with vertical injectors Combustion system Direct injection Wastegated, turbocharged with intercooler Starting system Cooling system Fresh water cooling with heat exchanger, and sea water cooled charge air cooler Lubrication system Totally enclosed, forced lubricating system with pump Direction of rotation (crankshaft) Counter clockwise viewed from Flywheel side Dry weight without sterndrive Engine mounting Rubber type antivibration mounts NOTE: Fuel condition: Density at 15°C = 0.84 g/cm 3; 1kW= 1.3596 mhp = 1.3410 HP * Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665) Technical data is according to ISO 8665 / 3046 Dimensions (For detailed li ne-drawings, please refer to our web-site: www.yanmarmarine.com or contact your supplier) 6BY2-260Z with Yanmar Sterndrive ZT350

Open the catalog to page 1

Performance Curves (Output is according iso sees) Power Torque Fuel Consumption Crankshaft Speed miir1 Crankshaft Speed min1 Crankshaft Speed min1 Yanmar sterndrive set Engine 1, Inner and outer transom surface must be parallel within 3mm in area covered by transom plates and remain within transom thickness limits. 2, Area covered by gimbal housing assembly must be flat to within 1,6mm. 3, Area covered by inner transom plate must be flat to within 3.2mm 5, Also available with: BravoX-1 and BravoX-2. Contact your local supplier for available configurations Instrument Panels Control head...

Open the catalog to page 2