NMEA 2000 USB GATEWAY YDNU-02 The gateway allows you to see data from a NMEA 2000 marine digital network on a PC, laptop or tablet PC with Microsoft Windows, Mac OS or Linux. With it, you get marine network data including vessel course, speed, position, wind speed and direction, water depth, AIS messages from vessels and aircrafts and other navigation data in PC applications. The device works as a bi-directional gateway so it is also possible to send messages from PC applications to the NMEA 2000 network. That allows, for example, sending of AIS data from a PC USB receiver to a chart plotter,...

NMEA 2000 Wi-Fi GATEWAY YDWG-02 The gateway allows you to see data from an NMEA 2000 marine digital network on a laptop, tablet or smartphone. Colorful web gauges on the built-in website shows vessel data right from a browser. Save on apps, save on additional instrument displays and monitor your boat from your cabin with a smartphone! The device works as a bi-directional gateway so it is also possible to send messages from PC. The Gateway supports TCP and UDP network protocols (both can be enabled at the same time). For UDP protocol, the number of clients (physical devices or software applications)...

NMEA 2000 Wi-Fi Router YDNR-02 The Router easily connects to all marine and mobile devices. It supports all popular marine protocols, is compatible with virtually all marine software, and even allows management of your vessel from a web browser without an internet connection or installed software. The Router is equipped with NMEA 2000 and SeaTalk ports, two NMEA 0183 ports, has three TCP/UDP data servers and a built-in web server, where you can easily configure it or update the firmware. It creates its own Wi-Fi network (Access Point) or can be connected to a boat's existing Wi-Fi. Features: built-in...

NMEA 0183 Multiplexer YDNM-02 Smart multiplexer with five NMEA 0183 ports and one SeaTalk port, auto detection of port speed and easy configuration with a click of a button! And, of course, it has flexible filters, routing rules, and supports firmware updates. It is the easiest multiplexer to install: instead of a laptop and software, you'll only need a paperclip. The Multiplexer has six configuration presets with different port speeds and routing schemes. Presets can be selected by pressing a hidden button. Ports can be configured to auto-detect the speed of connected equipment. Features: 5 x NMEA...

The Gateway allows you to see data from NMEA 0183 marine devices on a PC or smartphone and control the vessel from software. With this device, you get marine data including vessel course, speed, position, wind speed and direction, water depth, AIS messages from vessels and aircrafts and other navigation data in popular software applications. The Gateway works in both directions and enables control of the vessel from virtually any marine software including OpenCPN, iNavx, Expedition, Coastal Explorer, MaxSea and others. The Gateway has three TCP/UDP network servers with individual settings and...

The Router is a smart NMEA 0183 and SeaTalk multiplexer which also allows you to see data from marine devices on a PC or smartphone. The Router has all the features of the Gateway YDWN-02 (on the left), but has four physical NMEA 0183 ports and a SeaTalk port (multiple SeaTalk devices can be connected). An internal bi-directional converter between SeaTalk and NMEA 0183 allows use of SeaTalk data in NMEA 0183 and vice versa, including SeaTalk autopilot control from NMEA 0183. For a price of a usual NMEA multiplexer, you are getting a device with very flexible settings which can be easily configured...

CIRCUIT CONTROL YDCC-04 The Circuit Control contains four latching (bi-stable) relays, which can be managed from connected control buttons with LED indicators or over NMEA 2000 with standard messages. The Circuit Control is the core component of our digital switching system. In addition to connected buttons, loads can be managed with "virtual buttons" on the Web Gauges of our NMEA 2000 Wi-Fi Gateway, or automatically from our sensors. To set up additional control posts with duplicate physical buttons and indication, use Switch Control YDSC-04. Loads can also be managed from all chart plotters...

SWITCH CONTROL YDSC-04 The Switch Control allows viewing of the state and the management of four channels of an NMEA 2000 switch bank from the connected buttons with LED indicators. It is designed to work in tandem with Circuit Control YDCC-04 (contains four latching relays) and is compatible with other NMEA 2000 digital switching devices managed by standard NMEA 2000 PGNs 127501 and 127502. The Device has terminals for connection of four momentary push buttons with an LED indicator. External buttons are not supplied with this device; you can choose any to match your boat's interior. Benefits...

Alarm Button YDAB-01 The Alarm Button is a multi-function NMEA 2000 device with wires for connecting an external button with an LED indicator and a standard 4 or 8 Ohm speaker. It contains a 10W amplifier and a bank with 28 sound signals (car anti-theft alarm, ship horns, whistles, tone signals, etc.). The device can be configured for one of the following functions: MOB button (default mode). Pressing the connected button for two seconds sounds an alarm and sends AIS MOB messages (emulating the message received from EPIRB and SART devices with AIS VHF support) with the current GPS position. It...

The Run Indicator measures current and voltage of four connected loads (40V/10A constant load per channel, 15A peak), displays their status on a chart plotter and/or other NMEA 2000 equipment, and can be configured to manage digital switching equipment (including the Alarm Button) with a flexible rules system. Flexible rules allow the activation of digital switching channels when the electrical circuit is energized or not, when the load is on for too long (water tap left on) or when switching is too frequent (leak in fresh water system). ► visualizing of manually switching loads (running lights,...