Catalogs >
Xylem >
Washdown Pumps

Washdown Pumps
2Pages

Catalog excerpts

06 Washdown Pumps InTRODuCTIOn PAR-Max 3.0 GPM Washdown Pump PAR-Max Washdown Kit Jabsco offers boaters several washdown pumps at ideal flow and pressure for washdown. The nEW! Hotshot series offers robust 5 chamber diaphragm technology and a heavier duty motor in 4, 5 and 6 gPM versions. The Par-Max 7.0 gpm Washdown model offers an unbeatable flow rate of up to 7.0 gpm (26.5 lpm) at pressures of up to 80 psi (5.5 bar). Washdown pumps are ideal for cleaning decks, cockpits and anchors on yachts of a range of sizesand can be connected to sea or fresh water. Both nEW units come with an intake strainer, spray nozzle and quickconnect 3⁄4” hose barb fittings. • High pressure jet blasts mud and silt from anchor chain and decks. • Suitable for Marine Washdown. • Self priming up to 3m (10ft). SHUT-OFF PRESSURE • Thermal overload protection automatically stops the motor if it overheats. • Dry running. • Soft rubber mounts. 9'' long x 4.5'' wide x 4.5'' high (23cm x 11cm x 11cm) • Waterproof with sealed motor and sealed pressure switch for mounting in exposed positions. • Corrosion resistant. • Complies with uSCg 183.410 and ISO 8846 MARInE (Ignition Protection). • Supplied complete with Pumpgard™ and trigger nozzle. Suitable for North America: 12 volt DC model, 10 amp fuse size. 24 volt DC model, 5 amp fuse size. 12 volt DC model, 10 amp fuse size. 24 volt DC model, 5 amp fuse size. 12 volt DC model, 10 amp fuse size with 25ft (7.6m) hose coil. 24 volt DC model, 5 amp fuse size with 25ft (7.6m) hose coil. PAR-Max 4.0 GPM Washdown Pump • Suitable for high pressure applications. • Self priming up to 10ft (3m). Parts for PAR-Max Washdown (* or ** indicates which model is in the kit) Quick-disconnect nozzle with ¾” GHT snap-in connector (Suitable for North America)*.24 volt DC washdown kit. Pumpgard™ Strainer (Suitable for Europe)**. Deck fitting, 1⁄2” NPT female inlet with one 3⁄4” GHT male hose adaptor. Quick-disconnect nozzle attaches permanently to ½” hose. (Suitable for Europe)**. Pumpgard™ Strainer (Suitable for North America)*. Deck fitting, 1⁄2” BSP female inlet, with one 3⁄4” BSP male hose adaptor. SHUT-OFF PRESSURE 7.8” long x 4.0” wide x 4.0” high (20cm x 10cm x 10cm). Suitable for North America: 12 volt DC model, fuse 15 amp. 24 volt DC model, fuse 10 amp. 12 volt DC model with 25ft (7.6m) hose coil. 24 volt DC model with 25ft (7.6m) hose coil. 12 volt DC model, fuse 15 amp. 24 volt DC model, fuse 10 amp. 12 volt DC model with 25ft (7.6m) hose coil. 24 volt DC model with 25ft (7.6m) hose coil.

Open the catalog to page 1

HotShot Series The new HotShot Series robust five chamber, patented co-injected moulded diaphragm and larger heavier duty motor brushes significantly extends pump life by up to 50%. The HotShot Series washdown pumps are available in 4.0 (15.1 lpm), 5.0 (18.9 lpm) and 6.0 gPM (22.7 lpm) with pressures up to 70 PSI (4.8 bar) and are selfpriming up to 10ft. (3m). • Sealed switch and co-moulded diaphragm, eliminates leak paths, extending the life of the pumps by up to 50%. • Ergonomically designed spray nozzle provides powerful and accurate fire power with every shot. • Quick Disconnect Ports...

Open the catalog to page 2