*mynauticexpo

Catalogs
Xylem
Type III MSD Waste

Type III MSD Waste

Product catalog summary

Overview: The document details the Type III MSD Waste Management System by Jabsco, focusing on its features, installation, and maintenance. It includes specifications for components and guidance on electrical and plumbing requirements.

Specifications:

Holding Tank: Constructed from durable polyethylene with barbed fittings for hose connections.
Pumps: Features a heavy-duty macerator and evacuation pump with safety features to prevent run-dry and accidental activation.
Control Panel: Includes a touch-pad control panel with level indication and sleep mode.

Procedures:

Installation: The holding tank should be near the toilet, with proper seacock installation if below the waterline. The system must be mounted on a strong, flat surface supporting up to 90 lbs (40.8 kg).
Plumbing: Each tank has specific ports for deck pump-out, inlet from the toilet system, and overboard discharge, with a plumbing diagram provided.
Electrical: The unit should be wired in an independent circuit, with fuse and wire size specifications provided.

Maintenance: Annually flush the system with clean water to remove sludge or debris. For winter storage, empty the system of all water to prevent waste accumulation.

Key Features:

Safety: Includes fail-safe features to protect the pump from failure and accidental operation.
Efficiency: The macerator reduces particle size to a maximum of 3mm for efficient waste processing.
Convenience: Features a level indicator and sleep mode for user convenience.

Additional Information: The document provides part numbers for components and contact information for Jabsco's technical support.

Specifications and Features:

Activation Button: Requires a 3-second press to activate the pump, preventing accidental operation.
Averaging Methods: Two methods for level averaging during filling and emptying to ensure accurate readings.
Fail Safe Feature: The pump shuts down if no fluid movement is detected within 20 seconds, with a fault LED indicator.

Installation Guidelines:

Position the holding tank close to the toilet.
Use a proper seacock if the discharge thru-hull is below the waterline.
Install discharge thru-hull and holding tank to prevent siphoning.
Mount on a strong, flat surface capable of supporting up to 90 lbs (40.8 kg).
Attach four mounting feet with screws and washers.

Plumbing Components: Includes deck pump out, inlet port, inspiration hatch, and vent connections.

Control Panel and Electrical Systems:

Mount control panel using the provided template.
Wire the unit on an independent circuit, following the wiring table for fuse and cable sizes.

Maintenance and Storage:

Flush the system with clean water annually to remove sludge and debris.
For winter storage, ensure the system is completely drained.

Product Range and Warranty:

Jabsco offers a range of waste system products, including manual toilets, diaphragm pumps, and electric toilets.
Products come with a one-year limited warranty.

Catalog excerpts

Discover Jabsco’s Complete Range of Waste System Products TWIST ‘N’ LoCK™ MANUAL TOILET Deluxe flush electric toilets Designed to rival the comforts at home, the Jabsco Deluxe Flush combines sleek elegance along with the features required of a luxury marine toilet. 50840/50820 Series NEW! Twist ‘N’ Lock™ action safety handle provides a quick and easy lock that ensures a solid seal during your voyage. 29090-3000 Run Dry Macerator Pump Now with a fully sealed motor and a more powerful chopping blade. The four bladed chopper prevents clogging. NEW! 18590 Series Diaphragm waste pumps Heavy Duty Diaphragm Pump passes solids easily and quietly for maximum efficiency in emptying holding tanks. Type III MSD Waste Management System U.S.A UNITED KINGDOM JAPAN GERMANY ITALY +1 978 281 0440 +44 (0) 1992 450 145 +81 (0) 45 475 8906 +49 (0) 40 53 53 73 0 +39 039 6852323 quiet flush electric toilets 37045/37245 Series Discover Jabsco at www.jabsco.com The products described herein are subject to the Jabsco one year limited warranty, which is available for your inspection upon request. Les produits décrits ci-dessous bénéficient de la garantie limitée d’un an de Jabsco, que vous pouvez consulter sur simple demande. NEW! y- valve Robust Y-Valve allows waste to be pumped overboard or into a holding tank. 45490 Series Fäkalien-EntsorgungsSystem Typ III MSD Sistema di gestione dei rifiuti MSD Tipo III Vuilwatersysteem type III MSD Designed to dramatically reduce noise levels, Quiet Flush Electric Toilets make life on board more comfortable for all crew members, even those sleeping! 50890 Series 38110 Système pour traitement des déchets MSD de type III Die nachstehend beschriebenen Produkte unterliegen einer einjährigen Gewährleistung. Die Gewährleistungsbedingungen können bei Jabsco angefordert werden. I prodotti qui descritti sono coperti dalla garanzia Jabsco limitata di un anno, disponibile per la visione su richiesta. De hierin beschreven producten worden aangeboden met de beperkte Jabsco garantie van één jaar. Deze is op aanvraag verkrijgbaar ter inzage. För produkterna som beskrivs nedan utfärdar Jabsco ett års begränsad garanti, som vi kan skicka till dig på begäran. Los productos descritos en este folleto están respaldados por la garantía limitada de Jabsco por un año, que está disponible para su lectura a pedido. © Copyright 2007 ITT Corporation 950-0526 Rev A 2/08 Typ III MSDavfallshanteringssystem Sistema de gestión de residuos MSD Tipo III

Open the catalog to page 1

Type III MSD Waste Management System l Rugged Polyethylene holding tank l Barbed fittings for all hose connections l Heavy Duty Macerator l Evacuation pump l Three run-dry and accidental activation safety features l Touch-pad waste management control panel l Additional dock side evacuation pick up PUMP FEATURES Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate Impeller: Jabsco Nitrile compound Macerator: Stainless Steel Cutter reduces particle size to 1/8” (3mm) maximum Seal: Lip Type Ports: Inlet - 1 -1/2” (38mm) Hose Barb and 1-1/2” N.P.T. (Male) Outlet - 1” (19mm) Hose Barb...

Open the catalog to page 2

• 1x1” Overboard discharge port macerator pump out. Discharge: connect to the overboard discharge thru-hull fitting. *See plumbing diagram for recommended installation. Electrical: Wire the unit in an Independent Circuit. Consult the wiring table for fuse and wire size. Consult the wiring diagram for connections. Wiring Table AMP FUSE WIRE SIZE PER FEET OF RUN* VOLTAGE DRAW SIZE 0”-10” 10”-15” 15”-25” 25”-40” 40”-60” 12 Vdc 16 20 #16(1.5) #14(2.5) #14(2.5) #12(4) #6(16) 24Vdc 8 15 #18(1) #16(1.5) #16(1.5) #14(2.5) #10(6) * Length of run is total length of the circuit from the power source to...

Open the catalog to page 3

Système pour traitement des déchets MSD de type III l Réservoir en polyéthylène renforcé l Embouts cannelés pour tous les raccords de tuyauterie l Pompe de macération robuste l Pompe d’évacuation l Trois fonctions de sécurité contre le fonctionnement à sec et l’activation accidentelle l Tableau de contrôle des déchets, à pavé tactile l Poste de décharge à quai supplémentaire FONCTIONS DE POMPE Pompe : Turbine flexible auto-amorçante avec plaque d’usure en acier inoxydable Turbine : Composant Jabsco en nitrile Macérateur : Le broyeur en acier inoxydable réduit les déchets en particules de 3 mm...

Open the catalog to page 4

Orifice de décharge à la mer - Pompe de macération. Décharge - Raccord à l’embout du passe coque de dévidage à la mer. Consulter le diagramme de plomberie pour la méthode d’installation suggérée. Données électriques : Connecter l’unité à un circuit indépendant. Consulter le tableau de données électriques pour connaître la taille de fusible et de fil. Consulter le diagramme électrique pour les connexions. Tableau de données électriques AMP FUSIBLE TAILLE DE FIL POUR LONGUEUR DE CONDUCTEUR EN MÈTRES* TENSION TIRAGE TAILLE 0”-10” 10”-15” 15”-25” 25”-40” 40”-60” 12 Vdc 16 20 #16(1,5) #14(2,5) #14(2,5)...

Open the catalog to page 5

Fäkalien-EntsorgungsSystem Typ III MSD l Robuster Sammeltank aus Polyethylen l Schlauchstutzen für alle Schlauchanschlüsse l Leistungsfähiger Zerhacker l Absaugpumpe l Dreifacher Trockenlauf- und Einschaltschutz l Kontrolleinheit mit Folientastatur l Zusatzanschluss für landseitige Entleerung PUMPENAUSFÜHRUNG Pumpe: Impellerwerkstoff: Zerhacker: Dichtung: Anschluß: Motor: trocken selbstansaugend mit flexiblem Impeller und Edelstahlverschleißplatte Jabsco Nitril Edelstahlmesser zerkleinert Feststoffe auf < 3mm Wellendichtring (Simmerring) Einlass 38mm Ø / 1 ½“ NPT, Auslass 25mm Ø Permanentmagnet,...

Open the catalog to page 6

Type III MSD Waste

Type III MSD Waste

Catalog excerpts

All Xylem catalogs and brochures

Archived catalogs