*mynauticexpo

Catalogs
Xylem
Oil Change & Diesel

Oil Change & Diesel

Product catalog summary

Overview: The document outlines specifications and descriptions for various oil change and diesel transfer pumps, including models such as Porta-Quick, Gear Puppies, and Sliding Vane pumps. It covers fitting sizes, weights, flow rates, and self-priming capabilities.

Oil Change Pumps:

Porta-Quick: A portable oil changer using the vessel's power supply, featuring a 14-quart container, reversible pump, and compliance with USCG and ISO marine standards.
DIY Oil Changer: Facilitates easy oil changes with an 8' dipstick hose and a 14-quart container.
Flat Tank Oil Changer: Offers quick oil extraction with a stable flat tank design for easy disposal.
Oil Change Pump: A high-quality pump for quick oil changes, reversible, and self-priming up to 3ft.

Diesel Transfer Pumps:

Gear Puppies: Robust pumps for oil and diesel transfer, available in Junior and standard models, with flow rates up to 6.5 gpm.
Sliding Vane Pumps: Models like 18685 and VR100 offer high flow rates and self-priming capabilities, suitable for diesel and light oil transfer.

Utility Pumps:

Handy Boy and Little Pal: Multi-purpose hand pumps for draining and filling engine oil, made of corrosion-resistant materials.

Slimline Pumps: Compact submersible and inline pumps for various uses, including bilge pumping, deck showers, and diesel transfer, with flow rates up to 500 gph.

Key Specifications:

Voltage options: 12V and 24V DC, 115V AC.
Flow rates: Ranging from 1 gpm to 28 gpm depending on the model.
Temperature range: Some models operate between 22°F to 104°F.
Self-priming: Up to 16ft vertical lift for certain models.

Additional Features:

Maintenance Pad: Absorbs and biodegrades used engine oil, environmentally responsible.
Permanent Oil Drain Hose Kit: Provides easy oil removal with reinforced hoses and secure fittings.

Specifications:

Sliding Vane 18680 - 6 gpm Reversible: Light duty, 30-minute rated diesel pump with a flow rate of 6 gpm at a 10ft head, self-priming up to 3ft vertical lift, operating within 22°F to 100°F, compliant with USCG and ISO standards.
Sliding Vane 23870: Light duty, 35-minute rated diesel pump with a flow rate of 9 gpm at a 10ft head, self-priming up to 9ft vertical lift, operating within 22°F to 104°F, featuring an IP55 motor.
Sliding Vane VR050: Continuously rated diesel pump with a flow rate of 13.7 gpm at a 10ft total head, self-priming up to 9.6ft vertical lift, operating within 22°F to 104°F.
Sliding Vane VR100: Heavy duty, continuously rated diesel pump with a flow rate of 28 gpm at a 10ft total head, self-priming up to 16ft vertical lift, operating within 22°F to 104°F, featuring an IP55 and thermal protected motor.

Models and Accessories:

18680-0920: 12 volt DC model.
18680-0940: 24 volt DC model.
90200-0001: Service Kit for 18680 models.
23870-1200: 12 volt DC model with fitted switch and fuse.
23870-1300: 24 volt DC model with fitted switch and fuse.
VR050-1122: 1” ID hose, 24 volt DC, with fitted switch.
VR100-1122: 1¼” ID hose, 24 volt DC, with fitted switch and circuit breaker.

Fitting and Dimensions:

18680 models: Fitting connections for ½” NPT and 1” hose, size 7” x 4¾” x 3³⁄8”, weight 5.5lb.
23870 models: Fitting connections for ¾” ID hose, size 7” x 5½” x 4½”, weight 4.4lb.
VR050 models: Fitting connections for 1” ID hose, size 8½” x 5” x 5¼”, weight 5kg.
VR100 models: Fitting connections for 1¼” ID hose, size 10½” x 5¾” x 7¼”, weight 19.8lb.

Compliance and Standards: All models comply with ISO 8846 Marine (ignition protection) standards, ensuring safety and reliability in marine environments.

Catalog excerpts

Oil Change & Diesel Transfer Pumps 07 Oil Change Pumps Diesel Transfer Pumps

Open the catalog to page 2

07 Oil Change & Diesel Transfer Pumps selection guide Oil Change Pumps Fitting Size (height x depth) Hose- ½'' (13mm) ID x 48'' (12mm) long. Probe - ¼'' (6.5mm) OD x 40'' (100cm) long. Size (height x depth x width) Connections for 3/8” NPT male threaded fitting Size (height x depth x width) DIY Oil Changer .12 volt 8' dipstick probe. DC, fuse included. Flat Tank Oil Changer. 8' dipstick probe & 7' power leads. 12 volt DC, fuse 5 amp. Size (height x depth x width) Flow Self Priming gpm (lpm) 12 volt DC, fuse 10A Junior Gear Puppy. Call for more information. 24 volt DC, fuse 5A, Junior Gear Puppy....

Open the catalog to page 3

101 Sliding Vane 18680 6 gpm Reversible Size (length x width x height) 115 volt AC model, 1/8hp, 60Hz TENV, 3450 rpm (Non CE). 12 volt DC model, fitted switch, fuse 20 amp. 24 volt DC model, fitted switch, fuse 10 amp. Connections for 1” 24 volt DC, fuse 10 amp, fitted (25mm) ID hose, or switch. ¾” BSP. 24 volt DC, fitted with 20 amp switch and circuit breaker. Temperature Range Slimline Pumps 12 Volt dc model, fitted with reversing switch. Size (length x width x height) Temperature Range Size Weight Flow (length x width x height) Temperature Range Size Weight (length x width x height) Temperature...

Open the catalog to page 4

07 Oil Change & Diesel Transfer Pumps Oil Change Pumps The Porta-Quick™ Portable Oil Changer makes quick, clean and easy oil changes onboard any boat, because it uses the vessel’s own power supply to operate the powerful oil reservoir mounted flexible impeller pump. • 14 Quart (13 litre) container easily handles two engines. • Pump is reversible to both drain and refill engine oil. • Sturdy bronze pump head. • High temperature resistant Teflon™ dip-stick probe. • Non-collapsible thick wall suction hose. • Garden hose thread adapter included, for dipsticks with GHT male threaded ends. • Complies...

Open the catalog to page 5

DIY Oil Changer The Do-it-Yourself Oil Changer is simple to use, and offers quick and easy oil changes for the leisure boat owner. • Fully assembled. • 14 Quart (13 litre) container. • Tested for 1400 cycles. • 8’ (2.49m) dipstick hose. size WEIGHT The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. • Pump is reversible to both drain and refill engine oil. • Self-priming to 3ft (1m) of lift. • Includes 3/8” NPT full flow ball valve. • Reversing switch guard to avoid accidental...

Open the catalog to page 6

07 Oil Change & Diesel Transfer Pumps Oil Change Pumps Gear Puppies These robust pumps make oil and diesel transfer simple and easy for fixed installation systems. The Junior Gear Puppy can produce 3.5 gpm (14 lpm) and the Gear Puppy can produce up to 6.5 gpm (25 lpm) and handle viscosities up to 150cs. • Rugged bronze construction. • Inlet filter supplied. 23220-2012 12 volt DC, fuse 10A, Junior Gear Puppy. • Complies with USCG 183.410 and ISO 8846 MARINE (ignition protection). 24 volt DC, fuse 5A, Junior Gear Puppy. • 15 minute duty rating. 12 volt DC, fuse 15A, Gear Puppy. 24 volt DC, fuse...

Open the catalog to page 7

Engine Oil Drain Pump fitting • Screws onto threaded male ¾” garden hose Connection for ¾” GHT male thread. Polished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and Mercruiser. • (GHT) fitting on top of dipstick tube. • Gives simple “one-hand” pumping. Engine Oil Drain Pump. • Complete with 2ft (60cm) of ½” (13mm) ID drain hose. Handy Boy Utility Pump fitting Connection for ½” (13mm) ID hose. Foot adaptor for ½” (13mm) ID hose. 1 each ½” (13mm) ID hoses, 1 each 5/16” (6.5mm) probe, 1 each ¼” (6mm) probe. Versatile polished brass multi-purpose...

Open the catalog to page 8

07 Oil Change & Diesel Transfer Pumps Diesel Transfer Pumps Sliding Vane 18680 - 6 gpm Light duty, 30 minute rated diesel pump. • 6 gpm (23 lpm) at 10ft (3m) head. • 30ft (9m) maximum total head. • Self-priming up to 3ft (1m) vertical lift. • Duty cycle-30 minutes at 10ft (3m) at 86°F (30°C). • Rugged bronze pump head. • Complies with USCG 183.410 and ISO 8846 • MARINE (Ignition Protection). For service and spare parts listing see page 247. Sliding Vane 18680 - 6 gpm Reversible Light duty, 30 minute rated diesel pump with integral reversing switch. • 20ft (6m) maximum total head. • Self-priming...

Open the catalog to page 9

Sliding Vane 23870 Light duty, 35 minute rated diesel pump. • 20ft (6m) maximum total head. 7” long x 5½” wide x 4½” high (19cm x 11cm x 14cm). • Self-priming up to 9ft (2.8m) vertical lift. 12 volt DC model, fitted switch, fuse 20 amp. • Integral switch and fuse fitted as standard. 24 volt DC model, fitted switch, fuse 10 amp. • Accessories available. • ISO 8846 MARINE (Ignition Protection). For service and spare parts listing see page 247. Sliding Vane VR050 Continuously rated, diesel pump. 8½” long x 5” wide x 5¼” high (23cm x 13cm x 15cm). • 13.7 gpm (50 lpm) at 10ft (3m) total head. • Self-priming...

Open the catalog to page 10

Oil Change & Diesel

Oil Change & Diesel

Catalog excerpts

All Xylem catalogs and brochures

Archived catalogs