Catalogs >
Xylem >
Oil_Change_Diesel

Oil_Change_Diesel
6Pages

Catalog excerpts

07 Oil Change & Diesel Transfer Pumps The Porta-Quick™ Portable Oil Changer makes quick, clean and easy oil changes onboard any boat because it uses the vessel’s own power supply to operate the powerful oil reservoir mounted flexible impeller pump. • 14 quart (13L) container easily handles two engines. • Pump is reversible to both drain and refill engine oil. • Sturdy bronze pump head. • High temperature resistant Teflon™ dipstick probe. • Non-collapsible thick wall suction hose. • Garden hose thread adapter included for dipsticks with GHT male threaded ends. • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). SIZE 15-5/8" high x 13-1/2" diameter (35cm x 34cm) Hose: 1/2" (13mm) ID x 48" (120cm) long Probe: 1/4" (6.5mm) OD x 40" (100cm) long Replacement Nitrile Impeller Teflon™ Probe

Open the catalog to page 1

Flat Tank Oil Changer System The Oil Change Pump is the same high-quality pump used in the Jabsco Multi-Engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. • Pump is reversible to both drain and refill engine oil. • Includes 3/8" NPT full flow ball valve. • Reversing switch guard to avoid accidental activation. • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process. Ideal for changing engine oil in boats, RVs, lawn and garden equipment. There is...

Open the catalog to page 2

07 Oil Change & Diesel Transfer Pumps OIL CHANGE PUMPS Permanent Oil Drain Hose Kit The Oil Change System consists of a robust, self-priming flexible impeller pump mounted to an easy-to-install base and coupled to a five-port manifold, factory fitted with three full-flow ball valves. • The system includes a pump reversing switch to pump used oil out and new oil in. • The system cover includes a hinged valve cover to protect them from being accidentally opened. The Jabsco Oil Drain Hose Kit includes a drain plug fitting, oil drain hose assembly, hose hanger and a cap. This kit provides an...

Open the catalog to page 3

Slimline Pumps Handy Boy Utility Pump Connection for 1/2" (13mm) ID hose. Foot adapter for 1/2" (13mm) ID hose. One 1/2" (13mm) ID hose, one 5/16" (8mm) probe, one 1/4" (6mm) probe.

Open the catalog to page 4

07 Oil Change & Diesel Transfer PumpsSliding Vane 18680 - 6 GPM FITTING 7" long x 4-3/4" wide x 3-3/8" high (18cm x 12cm x 9cm) Light duty, 30-minute-rated diesel pump. • 6 GPM (23 LPM) at 10' (3m) head. • 30' (9m) maximum total head. • Self-priming up to 3' (1m) vertical lift. • Duty Cycle: 30 minutes at 10' (3m) at 86° F (30°C). MODEL DESCRIPTION For service and spare parts listing, see page 229. • Rugged bronze pump head. • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection). Sliding Vane 18680 - 6 GPM Reversible Light duty, 30-minute-rated diesel pump with integral...

Open the catalog to page 5

FITTING SIZE Connections for 3/4" (19mm) ID hose 8" long x 5" wide x 6-1/4" high (20cm x 13cm x 16cm) Light duty diesel pump. 10 GPM (38 LPM) at 10' (3m) head 22' (7m) maximum total head. Self-priming upto 9' (2.8m) vertical lift. 22°F(-30°C)to 104°F(+40°C) operating temperature range. 30 minutes at 10' (3m) at 86°F(30°C) IP55 and thermally protected motor. Integral switch fitted as standard. Accessories available. MODEL DESCRIPTION VF040-012-6120A 12V DC model, fitted switch VF040-024-6120A 24V DC model, fitted switch For service and spare parts listing, see page 229. • ISO 8846...

Open the catalog to page 6