03 Livewell/Baitwell Pumps INTRODUCTION Livewell/Baitwell Pumps The Livewell/Baitwell Pumps are built on Rule’s unsurpassed quality and leadership in pump design and technology. The innovative design includes many new and exciting features including: a quick, one-hand push button motor cartridge removal system, patented rotatable base that allows you to position the discharge nozzle at any location and threaded nylon hose barb attachments which allow for various hose mounting options. Other features include a built-in dual port option, water-cooled housing and positive snap motor cartridge locking mechanism. Pumps are available in 500 GPH (1895 LPH), 800 GPH (3027 LPH) and 1100 GPH (4162 LPH), plus 1600 GPH (6056 LPH) non-cartridge models, and are fitted for transom or seacock mounting options. Tips on Selecting a Livewell Pump • Always select a pump that will deliver enough water to replace livewell water every 6 to 10 minutes. • Bigger is not better — too much pump capacity could lead to airlocks and damage delicate bait. • Mount the pump as low and close to the hull as possible. • “C” series with 4" (102mm) angled pickup tube for through hull applications. • “STC” series with 4-3/4" (121mm) straight pickup tube for through hull applications. • “FC” series 500, 800, and 1100 GPH models with 3/4" (19mm) and 1600 GPH model with 1" (25mm) tapered thread pickup tube for seacock applications. NOTE High-speed water intake scoops can damage the pump and

Spring-loaded, one-hand, push button cartridge removal system NPSM thread allows for ._ multiple connection options Extended long nozzle to accept two hose clamps hose-to-barb connector Straight threaded . ^ hose-to-barb connector Glass reinforced nylon threaded adapters help prevent nozzle breakage and resist chemicals and plasticizers found in._ most hoses

03 Livewell/Baitwell Pumps LIVEWELL/AERATOR Designed with the patented infuser technology and a Gentle-Flow directional discharge, the Rule Gentle-Flow™ Oxygenator is the ideal system for keeping bait and catch alive and healthy. The patented infuser technology introduces air into the base of the livewell pump through the air control center, producing millions of micro-fine bubbles. Because the bubbles are so small, they remain suspended in the water longer, providing more aeration to your delicate bait and catch. Designed to fit almost any custom tank. Kits come complete with a pump, directional...

For through hull applications. Angled 4" (102mm) pickup tube. 12 volt DC. Forthrough hull applications. Straight 4-3/4" (121mm) pickup tube. 12 volt DC. Replacement Motor Cartridges Replacement Motor Modules for all Tournament Series™ Aerator Pumps. NOTE Not to be used on the Pro-Series™. "FC" Series Tournament Series™ Seacock Inlet MODEL For seacock applications. 3/4" (19mm) NPT intake with tapered threads. 12 volt DC.

High-performance, live-bait aerators keep bait and catch alive and healthy in a smaller amount of water. Air is infused with the water at the pump impeller, then millions of micro-fine bubbles are produced and sent gently out of the pump into the livewell. Because the bubbles are so fine, they remain suspended in the water longer and more aeration is provided for your delicate bait and catch. 12 volt DC. Aerates from 5 to 30 gallons (19 to 113L) of water. The Rule 360 GPH (1741 LPH) pump attaches easily to any non-porous surface. 9" (22.9cm) long spray tube can be custom cut to fit into any container....

Oxygenator Spray Head Replacement Motor Cartridges for Original Pro-Series™ Livewell Pumps Replacement motor cartridges for Rule Cartridge Bilge Pumps and Livewell/ Aerator Pumps. 12 volt DC. NOTE Not to be used with Tournament Series™. The Variable Flow Control Valve allows increases and decreases of flow with no damage at all to the pump. Range includes fully open flow to zero flow. For use with 3/4" (19mm) hose. Rule's Oxygenator Spray Head sprays streams of water back into the livewell tank, enriching the water with oxygen. Adjustable spray head allows you to increase or decrease flow of...