*mynauticexpo

Catalogs
Xylem
INTERNATIONAL Beverage Product Catalogue

INTERNATIONAL Beverage Product Catalogue

Product catalog summary

Overview of Parts
The document provides an exploded view of beverage and beer pumps, focusing on gas (CO2)/air-driven models. These pumps increase pressure in the dispense line, preventing gas breakout in beer and allowing for smaller tubing, reducing waste during cleaning. They can supply up to three faucets from a single line and cover up to 800 feet horizontally. The pumps also assist in beer line cleaning and maintain quality by not exceeding natural keg pressure.

Introduction to Beverage/Beer Pumps
Gas-driven pumps are used for dispensing beverages from BIBs, kegs, and tanks. Flojet's BeerJet series maintains equilibrium pressure to preserve beer carbonation as intended by brewers. These pumps can handle long horizontal or vertical runs and serve multiple taps from a single keg.

Selection Guide
The selection guide details various pump models, including the T5000, G58, G56, G80, M Series, G55, HPR, VM, and GP Series. Each model is described with specifications such as product and gas inlet fittings, pump design, power source, materials, temperature limits, weight, dimensions, displacement, self-priming capability, operating pressure, flow rate, approvals, and warranty.

Key Specifications

T5000 Series: Positive displacement, double diaphragm pumps with CO2, nitrogen, or compressed air power. Flow rate: 4.0 oz/sec, 5-year warranty.
G58 Series: Similar design with a flow rate of 6.0 oz/sec, 3-year warranty.
G56 Beerjet: Designed for beer dispensing with a flow rate of 5 GPM, 3-year warranty.
G80 PulpJet: Suitable for smoothies, featuring a duckbill valve, flow rate of 6.0 oz/sec.
HPR Series: Magnetically coupled regenerative pumps with a flow rate of 5.5 LPM.
VM Series: Centrifugal pumps with a flow rate of 5.5 GPM.
GP Series: Offers a run-out flow rate of 4.6 GPM, motor output of 60 watts.

Conclusion
The catalogue provides comprehensive details on various beverage and beer pumps, highlighting their capabilities, specifications, and applications. These pumps are designed to maintain beverage quality and efficiency in dispensing operations.

Beer/Soda Chilling Pumps - Centrifugal

Models: GP20/18, GP20/22, GP28/11, GP50/25, SPC8/2, SPC12/4, SPC51, SPC42, SPC43, SPC44, SPC18.
Specifications include temperature range (-4ºF to +185ºF), pressure (up to 36.3 psi), flow rates (up to 16.25 GPM), and motor outputs (up to 550 watts).
Designs vary from magnetically coupled centrifugal pumps to semi-submersible column pumps.

Water Booster Systems

Models: G60 Series, K56 Series, 2820 Series, 2840 Series, 2830 Series.
Features include positive displacement, double diaphragm design, and various power sources (CO2, nitrogen, compressed air).
Operating pressures range from 20 psi to 100 psi, with flow rates up to 35 GPM.

Electric Bag-in-Box Pumps

Designed for dispensing syrups, juices, wines, and liquors.
Features include built-in vacuum switch, pressure switch, self-priming capability, and run-dry technology.
Models: 2125 Series, BevJet Compact, with voltage options for different regions.

Bottled Water Systems

Designed for dispensing bottled water to coffee machines and beverage dispensers.
Features include illuminated on/off switch, long-life motor, and quiet operation.
Models: BW5000 Series with single and dual inlet options.

General Pumps

Applications include low-flow beverage dispensing, water purification, and espresso brewing.
Specifications cover reciprocating diaphragm pump design with flow rates from 0.15 GPM to 1 GPM.

AC VSD Series Pumps - Quad Model

Maintains steady fluid pressure with variable flow demand.
Features include energy conservation, quiet operation, and automatic motor speed adjustment.
Specifications: Positive Displacement Diaphragm design, 130°F fluid temperature limit, 115V voltage, and 5.0 GPM flow rate.

Water Booster/Delivery Pumps - Duplex II Series

Self-priming up to 8 feet and can run dry without damage.
Specifications: Positive Displacement two piston design, flow rates of 2.2 GPM for high pressure models, and pressures up to 100 PSI.

Demand & Manual Single Fixture Pumps - LF and LF Plus Series

Compact design with self-priming and run-dry capability.
Specifications: Maximum pressure of 150 PSI, intermittent duty cycle, and 1.4 GPM flow rate.

Triplex Series High Pressure Pump

New standard model numbers with pressures up to 150 PSI and flow rate of 1.4 GPM.

Beverage Solenoid Pumps

Designed for low flow, high pressure applications such as espresso machines and steam irons.
Specifications: Pressure rating up to 19 bar, flow rating up to 1200 cm³/min, and various voltage options.

Water Filtration - C Series

Provides high reliability for delivering recipe quality water with options for sediment, chlorine, and chloramine reduction.
Specifications include various capacities and micron ratings for different applications.

Accessories and Fittings

Includes mounting brackets, transfer valves, and various fittings for different pump series.

Product Information
Details on various standard model numbers for fittings and accessories used with different sizes of tubing. The fittings are categorized based on their compatibility with specific outer diameters (O.D.) of tubing, ranging from 1/4" to 1/2". The document lists part numbers and descriptions for each fitting type, including plastic and brass fittings, some with additional features like shutoff capabilities.

Accuracy and Completeness of Information
All information regarding products and services is subject to change without notice. While efforts are made to ensure accuracy, Flojet does not assume responsibility for any errors or outdated information.

Company Overview
Xylem is a global water technology company focused on developing innovative solutions for water use, conservation, and reuse. The company operates in over 150 countries, providing expertise in moving, treating, analyzing, and returning water to the environment.

Contact Information
Contact details for Xylem offices in the United Kingdom, China, Germany, Italy, and the United States, including phone and fax numbers.

Additional Information
Xylem is committed to creating solutions that meet global water needs, leveraging a combination of leading product brands and applications expertise.

Catalog excerpts

INTERNATIONAL Beverage Product Catalogue-1

Beverage Product Catalogue Quick Find Brochure

Open the catalog to page 1

INTERNATIONAL Beverage Product Catalogue-2

Exploded View Recirculation and carbonation pumps Flojet provide a range of pumps for carbonated water recirculation and water boost pumps for ambient and cold water carbonation systems. Flojet provide T and G series pumps that are industry leading pumps capable of dispensing syrups, juices and wines long distances from the backroom to dispense tap Seer cooling and dispensing pumps Flojet provide a range of pumps to recirculate glycol or water through pythons and trunk line as well as the industry leading G56 for dispensing beer over short and long distances both accurately and efficiently. Flash...

Open the catalog to page 2

INTERNATIONAL Beverage Product Catalogue-3

Beverage/Beer Pumps Gas Driven Gas (CO2/air) driven pumps are a popular industry method for dispensing from BIBs, kegs and tanks. Flojet produces a range of gas driven pumps suitable for syrups, juices, smoothies, wine and beer. Flojet’s BeerJet pumps are capable of pumping beer up to 240 meters horizontal or 30 meters vertical through a single line. The pump can dispense up to five taps from a single keg and has a service life of more than 250,000 liters. The Flojet BeerJet series pumps are designed to dispense beer at the brewer specified keg top pressure, through long or short, vertical or...

Open the catalog to page 3

INTERNATIONAL Beverage Product Catalogue-4

Beverage/Beer Pumps Gas Driven SELECTION GUIDE Product Outlet Pump Design: Power Source Materials of Construction (wetted parts): Temperature Limits Dimensions: (Height x Width x Depth) Self Priming: Operating Pressure: Liquid Inlet Pressure: Flow Rate: ³/8” (9.52 mm) Barbed Straight Plastic (Celcon) ¼” (6.35 mm) CO2 Inlet Plastic (Celcon) Positive Displacement, Double Diaphragm CO2 Gas, Nitrogen or Compressed Filtered Air T5000 Polypropylene, Santoprene®, EPDM, 302 or 304 Stainless Steel Spring ³/8” (9.52 mm) Barbed Straight Plastic (Celcon) ¼" (6.35 mm) Barbed Straight Stainless Steel Positive...

Open the catalog to page 4

INTERNATIONAL Beverage Product Catalogue-5

Beer /Soda Chilling Pumps - Centrifugal 02 B eer / Soda Chilling Pumps - Centrifugal SELECTION GUIDE Port Details Dimensions: (height x width x depth) Fluid Temperature Flow Rate: (l/min) Pump Design: Materials of Construction (wetted parts): Magnetically Coupled Regenerative Pump Magnetically Coupled Regenerative Pump Magnetically Coupled Regenerative Pump Magnetically Coupled Regenerative Pump Magnetically Coupled Regenerative Pump Magnetically Coupled Regenerative Pump Port Details Dimensions: (height x width x depth) Fluid Temperature Flow Rate: Pump Design: Materials of Construction (wetted...

Open the catalog to page 5

INTERNATIONAL Beverage Product Catalogue-6

Beer / Soda Chilling Pumps - Centrifugal SELECTION GUIDE Flow Rate: Closed Valve head Pump Design: Motor Output: Magnetically Coupled Centrifugal Pump Magnetically Coupled Centrifugal Pump Port Details Dimensions: (height x length) Fluid Temperature Operating Pressure: Flow Rate: Pump Design: Materials of Construction (wetted parts): Motor Output Semi-Submersible Column Pump 1 Stage SS mounting plate, TPE impellers, ABS column & pump body, SS Shaft, Nylon Agitator Port Details Dimensions: (height x length x width) Fluid Temperature Operating Pressure: Flow Rate: Pump Design: Materials of Construction...

Open the catalog to page 6

INTERNATIONAL Beverage Product Catalogue-7

Water Booster Systems 03 Water Booster Systems SELECTION GUIDE Product Inlet Fitting Pump Design: ½" (9.52 mm)Barbed Straight Plastic (Polypropylene) Positive Displacement, Double Diaphragm ½" (9.52 mm)Barbed Straight Plastic (Polypropylene) Product Inlet Fitting Pump Design: ½" (12.7 mm) Barbed Straight Plastic (Polypropylene) Positive Displacement, Double Diaphragm Power Source Materials of Construction (wetted parts): Temperature Limits Dimensions: (Height x Width x Depth) Self Priming: Operating Pressure: Liquid Inlet Pressure: Flow Rate: CO2 Gas, Nitrogen or Compressed Dry Filtered Air Polypropylene,...

Open the catalog to page 7

INTERNATIONAL Beverage Product Catalogue-8

Electric Bag-in-Box Pumps BevJet Compact 2125 Series Bag in Box is a common, economical system for distributing drinks into the market. It is used worldwide and, because Flojet are a leading supplier of pumps to dispense all BIB liquids, we have a strong understanding of how to transfer your drinks from the BIB to the customer. Flojet BIB pumps are currently dispensing syrups, juices, wine, spirits and even fruit pulp. Flojet make both electric and air driven pumps capable of dispensing BIB drinks over long distances, suitable for backroom systems, but are also compact and quiet enough to sit...

Open the catalog to page 8

INTERNATIONAL Beverage Product Catalogue-9

Bottled Water Systems NEW Bottled Water 5000 Series General Pumps Demand & Manual Single Fixture Pumps LF and LF Plus Series APPLICATIONS ÌÌ Low-flow, low pressure beverage dispensing and transfer ÌÌ Liquor dispense APPLICATIONS ÌÌ Designed for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts. Water Booster /Delivery Pumps - Duplex II Series ÌÌ For remote locations where water supply is inaccessible FEATURES AND BENEFITS ÌÌ Illuminated On/Off Switch: Provides clear visibility in dark or hard-to-reach places ÌÌ Long-Life Motor: Ensures years of reliable...

Open the catalog to page 9

INTERNATIONAL Beverage Product Catalogue-10

Demand & Manual Single Fixture Pumps LF and LF Plus Series Water Booster / Delivery Pumps - Duplex II Series Triplex Series High Pressure Pump AC VSD Series Pumps - Quad Model SPECIAL FEATURES SPECIAL FEATURES SPECIAL FEATURES SPECIAL FEATURES ÌÌ Compact automatic demand or manual pump ÌÌ Self priming up to 8 feet (2.4 m) ÌÌ Maintains steady fluid pressure in response to variable flow demand ÌÌ Chemical resistant material ÌÌ Pump is sealed in corrosion resistant material, thus offering unparalleled performance and life ÌÌ Intenal bypass standard ÌÌ Bypass System eliminates pulsation and cycling...

Open the catalog to page 10

INTERNATIONAL Beverage Product Catalogue-11

Beverage Solenoid Pumps PS Series Oscillating Pumps Data table. Part No. Max. Flow Max. Flow (cm³/min) (gallon/min) Port / Elastomer Material Building on our extensive experience in positive displacement pumps, Flojet’s new PS Series Oscillating pumps provide a compact solution for low flow, high pressure applications. Performance data. · Nominal Voltage: 110 / 230 VAC · Liquid Temperature: Maximum 95°F (35°C) · Pressure Rating: Up to 19 bar (276 psi) · Flow Rating: Up to 1200 cm³/min (0.32 gal/min) Typical applications. · Espresso Coffee Makers · Floor Care Machines · Steam Irons · Steam Generators...

Open the catalog to page 11

INTERNATIONAL Beverage Product Catalogue

INTERNATIONAL Beverage Product Catalogue

Catalog excerpts

All Xylem catalogs and brochures

Archived catalogs