NEW! Flush Mount Halogen Floodlight light the night for cockpit, deck and boarding point illumination for leisure, commercial, fishing and safety craft ITT Jabsco is pleased to announce the introduction of our new Flush Mount Halogen Floodlight. Designed specifically for the rigors of the marine environment, it features an exclusive weather-proof “full boot seal” to protect the wire contacts from corrosion. Finely styled to integrate with contemporary yacht designs, the new floodlight is both attractive and tough. Constructed of shock and vibration resistant materials with a U.V. stable housing to eliminate “yellowing”, the floodlight will provide many years of dependable service even in the toughest conditions. Best of all are its superior lighting characteristics. The 45˚x 20˚ flood beam pattern has sharp edge cut-offs to reduce stray lighting with no “hot spots”, providing uniquely even lighting. The new Jabsco Flush Mount Floodlight is the smart choice for cockpit, deck and boarding point illumination for leisure, commercial, fishing and safety craft. Features and Benefits • 3” x 5” (76mm x 127mm) 50 watt sealed beam halogen • 45˚ x 20˚ flood beam pattern • U.V. stable materials for non-yellowing • Heavy duty shock and vibration resistant construction • Weather-proof “full boot” seal protects wire contacts

Flush mount halogen floodlight | light the night Specifications A Models: 45930-2012, 3 x 5 Flush Mount - Angled Back 45930-2512, 3 x 5 Flush Mount - Straight Back Beam Angle: 45˚ x 20˚ Floodlight Mounting Options Voltage: 12 VDC Cautionary Notes: 1. Amperage: 3.8 @ 12 VDC; 4.1 @ 13.6use. Install in exterior, well Floodlight is designed for marine VDC ventilated Watts: 50 areas. For all other uses, contact ITT Jabsco. 2. Size: 6-3/4” long xfloodlight while “on” or overheating may Do not cover the 4-1/4” high x 2-3/4” deep; occur. (95mm x 108mm x 70mm) 3. Do not immerse or pressure spray floodlight...