Introduction
The eXtreme 6.3 sport rib is designed for better performance and longer life, utilizing advanced Formula 1 autoclave technology for its construction.

Construction and Technology
The rib is made entirely from prepreg carbon, offering a strength equivalent to 6mm steel but at a fraction of the weight. This technology, derived from Formula 1, allows for any desired shape and provides an optimal carbon-epoxy ratio.

Strength-to-Weight Ratio
The specific construction gives the eXtreme rib the best strength-to-weight ratio, enhancing lift and maneuverability. It is more efficient, performs better, and has a longer lifespan compared to other ribs.

Lightweight Design
Weighing nearly half of an average polyester rib, the eXtreme rib is easier to transport. The bare hull weighs less than 250kg, making it an ideal tender.

Specifications

• Length: 6.30 m
• Beam: 2.57 m
• Weight incl. engine: 650 kgs
• Bare hull weight: 250 kgs
• Recommended Engine: 115 HP Yamaha
• Top speed: 45+ knots
• Persons Capacity: 6
• Max. Load Capacity: 1050 kgs
• Design category: C
• Warranty: 24 months

Standard Equipment

• Carbon console & handrails
• Carbon fuel tanks
• LED Navigation and Head lights
• Normal engine instrumentation
• Fuel gauge
• 3 Lifting strops, Fenders, Mooring lines
• Fire extinguisher

Additional Equipment
Options include a freshwater system, refrigerator, audio system, VHF radio, GPS, and more.

Contact Information
eXtreme Ribs, Amsterdamsestraatweg 27, 1411 AW Naarden, The Netherlands. Phone: +31 (0)35 678 00 60, Email: [email protected], Website: www.extremeribs.eu