XIAMEN LONAKO INDUSTRY & TRADE CO., LTD Tel: +86-592-5689172 Fax: +86-592-5689173 Web: www.lonako.com Add: N307, Weiye Building, China Pioneering Park,Xiamen, Fujian361009, P.R.China Product Name: LED Positioning Lights Product Type: LNK-PL Document No.: LNK--OM-PL Version: V2.0 Total Pages: 10 pages in all Effective Date: December 30,2018

Operation and Maintenance Instruction LNK-OM-PL/V2.0 SECTION III INSTALLA TION INSTRUCTIONS 5 SECTION W Operation And Usage Instruction 7 SECTION V ServiceLife & Safety 8 SECTION W Repair AND Disposal Instructions 9

Operation and Maintenance Instruction LNK-OM-PL/V2.0 SECTION ⅠPURPOSE The operation and maintenance instruction is used to guide users how to operate and maintain LNK-PL series LED Positioning lights properly. It also has full instruction of the products` functions and specifications. LONAKO LED positioning lights are built-in lithium batteries powered indicating lights,which can be recharged by Solar power. The lights are suitable to be installed on any object requiring position indicating, such as small boats, yachts, buildings, garden etc. There are six types as below Figure 2-1: LNK-PL-RGW...

Operation and Maintenance Instruction LNK-OM-PL/V2.0 The lights are completely wireless and have 3 kinds of different controlling methods: 1, Light sensor switch: the lights have an internal light-sensitive system which is able to control the light automatically turn the flashing status on at night and turn off at day time. 2, Manual switch: there is a main power switch button and a function switch button (see figure2-1) at the bottom of the lights controlled by manually. 3, Wireless remote: the remote is able to control the light to switch different function status. (See Chapter 4.1.5 and 4.1.6...

Manual switch and wireless remote

Operation and Maintenance Instruction LNK-OM-PL/V2.0 Table 2-2.2 Function status of LNK-PL-RGW SECTION W Installation Instructions 3.1 Installation Limitation The LED positioning lights are suitable to be installed on any object requiring position indicating. Such as: yachts, fish boats, leisure boats, docks, gardens, buildings and other suitable locations and objects. The lights should not be installed on a place or position where has lightning stroke risks.

Operation and Maintenance Instruction LNK-OM-PL/V2.0 3.2 Installation Requirement 3.2.1 LONAKO LED positioning light should be installed on the top of ships or other applicant objects in order to ensure its maximum visibility in all directions. And the solar panel should not block from the sunlight. 3.2.2 The components for installation include 1pcs shim, 6pcs screws, 2pcs nut, 6pcs clip and 1unit anti bird thorn. The biggest two clips are fit for 1.2~1.3 inch pipe. The two middle size clips can be separately inserted into biggest clips to become one unit bracket for 0.95~1.05 inch pipe. The...

Operation and Maintenance Instruction LNK-OM-PL/V2.0 Figure 3-2.1 Horizontal direction pipe installation Figure 3-2.2 Vertical direction pipe installation 3.2.5 In order to avoid the birds standing on light and block the solar panel from sunlight, one unit anti-bird thorn is packed together with light. the users should set the spring spikes on the thorn as below Figure 3-3.1 . Then peel off the 3M tape on bottom of the thorn and stick it on the top of the light, which is just on red circle position shown on Figure 3-3.2 to make sure avoiding solar panel function zone and light sensor. Figure...

Operation and Maintenance Instruction LNK-OM-PL/V2.0 4.1.6 Each remote matches the light it was packed with. But if the old remote is lost or broken, the user can just buy new remote to match the old light. The matching operation is as below: 4.1.6.1 First, use one hand to keep pressing “FUNCTION SWITCH” on remote and point the light; 4.1.6.2 Second, use another hand to keep pressing “POWER ON/OFF” at the bottom of light to turn on the light. After about two seconds, the light have a very short flashing. the new remote should be matched with the old light. 4.1.6.3 Third, press “FUNCTION SWITCH”...

Operation and Maintenance Instruction LNK-OM-PL/V2.0 SECTION Ⅵ INSPECTION 6.1 Inspection LED positioning lights should be inspected and clean the solar panel, light sensor and light lens every 6 months in order to ensure the efficiency of absorbing sunlight and sensitivity of distinguishing visibility. SECTION Ⅶ MAINTENANCE The LED positioning lights are maintenance free, but the following routine checks should be done: 7.1 Keep the original packaging of light well and do not put heavy goods on light during storage period. 7.2 The Lithium Batteries of the lights must be recharged at least one...

Operation and Maintenance Instruction LNK-OM-PL/V2.0 Figure 9-1 Single unit package box 9.2 Carton package: 50units per carton. The size of carton is 630*280*475mm. The volume is 0.08m³and gross weight is about 22.8kg. SECTION Ⅹ MANUFACTURER INFORMATION Company name: XIAMEN LONAKO INDUSTRY & TRADE CO., LTD. Add: N307, Weiye Building, China Pioneering Park, Xiamen, Fujian361009, China Tel：+86-592-5689172 Fax：+86-592-5689173 Email：[email protected] Web：www.lonako