XCMG XTF8010K Telescopic Handler

Product catalog summary

Performance
The XTF8010K telehandler has a maximum lifting capacity of 8000 kg and a maximum lifting height of 9.5 meters. It can extend up to 5.59 meters and has a maximum height lifting capacity of 4500 kg. The lifting and lowering speeds are 18 and 15 seconds respectively, with a travel speed of 32 km/h and a gradeability of 38%.

Main Technical Data
The unladen weight with forks is 15500 kg. The overall dimensions are 2560 mm in width, 2540 mm in height, and 6120 mm in length. It is powered by a Cummins QSF3.8 engine with a power output of 97 kW at 2200 rpm and a torque of 488 Nm at 1600 rpm. The hydraulic system pressure is 280 bar, with a hydraulic oil tank volume of 160 L and a fuel tank volume of 140 L.

Main Parts List
Key components include a Cummins engine, Dana transmission, front and rear axles, Parker main pump and valve, Eaton steering gear, and tires from Guangzhou Langqin Tire Co., Ltd.

Optional Parts
Optional configurations include a boom wire harness, torque limiter system, air conditioning, solid tires, and an open cab. When using manned equipment like a work platform, a boom wire harness and torque limiter system are required.

Notes
This document is for reference only and should not be used for operating the telehandler. The machine is off-road and must comply with local traffic regulations. It should operate on firm ground with a gradient not exceeding 3% and is only permissible under wind conditions below grade 6.

Catalog excerpts

作业性能 Performance 主要技术参数 Main Technical Data 主要配套件明细表 Main parts list

Open the catalog to page 2

作业性能 Performance 举升能力 Lifting Capacity 最大起升高度 Max.lifting height 最大高度吊重量Max.height lifting capacity 最大幅度吊重量Max.amplitude lifting capacity 举升/下降速度 Unladen lifting/lowering speed 外伸/回缩速度 Unladen Extension/retraction speed 属具配置 Attachment Selection 行驶性能 Driving Capacity 调平范围 Level

Open the catalog to page 3

主要技术参数 Main Technical Data 项目 Item 整机重量（含货叉）Unladen weight(with forks) 长度Overall length 离地间隙 Ground clearance 货叉倾翻角度（上倾翻/下倾翻）Tilting angle of fork(tip up/tip down) 液压系统压力 Hydraulic system pressure 液压油箱容积 Hydraulic oil tank volume 燃油箱容积 Fuel tank volume 货叉规格（可选配）Fork specifications(optio

Open the catalog to page 4

主要配套件明细表 Main parts list 序号 N0. 前桥Front axle 后桥Rear axle 美国德纳 America Dana 美国德纳 America Dana 美国德纳 America Dana 派克 Parker 派克 Parker 济宁伊顿液压系统有限公司 Jining eaton hydraulic system Co., Ltd. 徐州徐工液压件有限公司 Xuzhou Hydraulic Parts Co., Ltd. XCMG 广州市朗琴轮胎集团有限公司 Guangzhou langqin tire Co.,Ltd 卡斯卡特货叉有限公司 Cascade fork Co.,Ltd. 选装部件 Optional parts 部件 Part 吊臂线束（线束、连接器）Boom wire harness(Wire harness、connector) 力矩限制器系统 Torque limiter system

Open the catalog to page 5

All information in the brochure is provided for reference only. Never rely on it to operate the machine. Refer to the operation manual for operation instructions of the machine. The machine belong to off-road machines. Local traffic rules and regulations must be observed. For long-distance job site transfer, use a trailer and take GVW, axle load and dimensions of the machine into consideration. The machine must be operated on firm ground, which gradient does not exceed 3%. Operation of the machine is permissible only when the wind force is below grade 6. When operating the machine under wind,...

Open the catalog to page 6

XCMG XTF8010K Telescopic Handler

XCMG XTF8010K Telescopic Handler

Catalog excerpts

All XCMG catalogs and brochures