XCMG XTF18010 Telescopic Handler

1 / 5 PagesView full catalog

XCMG XTF18010 Telescopic Handler

Product catalog summary

Specifications:

Lifting Ability: The telescopic handler XTF18010 has a maximum lifting capacity of 18,000 kg with forks at a 600 mm load center.
Lifting Height: The maximum lifting height is 9.7 meters.
Fork Dimensions: The forks measure 1500 mm in length, 200 mm in width, and 80 mm in thickness.
Tires: Equipped with 445/95 R25 tires.
Engine: Powered by a Cummins QSB6.7 engine with a power output of 129 kW and a maximum torque of 675 NM at 1200 RPM.
Grade Ability: The grade ability is 68% when unloaded and 33% when fully loaded.
Transmission: Features hydrostatic transmission with electro-hydraulic control for reversing shift and 2 forward and 2 reverse gears.
Max Travel Speed: The maximum travel speed is 25 km/h.
Axles: Uses DANA axles.
Steering Mode: Offers 4-wheel steering with 3 steering modes.

Capacities:

Hydraulic Oil Capacity: 290 liters.
Fuel Tank Capacity: 200 liters.
Unladen Weight: The unladen weight with forks is 24,080 kg.

Dimensions: Detailed dimensions are provided in the document.

Load Chart: A load chart is included to illustrate the load capacities at various heights and extensions.

Case Studies: Examples of use cases are provided to demonstrate the application of the telescopic handler.

Catalog excerpts

重载型伸缩臂叉装车 Telescopic Handler

Open the catalog to page 1

XTF18010 举升能力 Lifting ability 额定载荷（600 毫米载荷中心） Max. capacity with forks at 600mm 举升臂高度 Max. lifting height 货叉尺寸 Fork Dimensions 最大扭矩 Max. torque 爬坡能力（空载/满载） Grade ability (unload/rated load) 传动方式 Transmission 倒档 Reversing shift 档位数（前进、后退） Number of gears(forward/reverse) 最大行驶速度 Max.travel speed 轴 Axles 转向模式 Steering mode 68%/33% 静压传动 hydrostatic 电磁 Electro hydraulic co

Open the catalog to page 2

外形尺寸 Dimensio

Open the catalog to page 3

XCMG XTF18010 Telescopic Handler

XCMG XTF18010 Telescopic Handler

Catalog excerpts

All XCMG catalogs and brochures