Smart choice for power™ XM 1000 and XM 1800 modifed sine wave inverters with transfer switch, designed for RVs and boats Available in: Designed for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. The XM 1000 and 1800 models are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The Xantrex PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. Both XM 1000 and 1800 models are designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Product Features » 1000 / 1800W inverter easily powers TVs, small appliances, and other electronics » Built-in 15A circuit breaker on AC pass-through » Up to 15A/20A pass through for hardwired loads for XM1000/XM1800 respectively » Digital remote control displays power output, AC source and battery voltage » Detachable remote control can be mounted wherever convenient » Conformal coated electronics provide moisture resistance » Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included) FREEDOM XM STATUS Utility Battery Fault Detachable remote panel for convenient system status monitoring Protection Features » Battery over-voltage and under-voltage protection » Over temperature shutdown » Automatic overload protection » Short-circuit protection » Ground fault protection Recreational vehicles Heavy duty trucks Work vehicles Buses / coaches Specialty vehicles ETL listed to CSA Standard C22.2 No. 107.1 and UL 458* with Marine supplement *For marine supplement compliance drip shield in specific mounting orientation is required. See installation guide Xantrex Technology Inc. 3700 Gilmore Way Burnaby, British Columbia Canada V5A 4B5 800 670 0707 Toll Free 604 420 1591 Fax 541 Roske Drive, Suite A Elkhart, Indiana USA 46516 800 446 6180 Toll Free 574 294 5989

Smart choice for power™ Electrical specifications – inverter Output power (continuous) Surge rating Output current (continuous) Output voltage range Output frequency regulation Output wave form Modified sine wave Modified sine wave Peak efficiency No-load input power (producing output voltage) Power draw in standby mode Input opearating voltage range Transfer relay rating Transfer time Operating temperature range Storage temperature range Unit weight Part number General specifications Regulatory and environmental compliance ETL listed to CSA Standard C22.2 No. 107.1, UL458 with marine supplement*...