*mynauticexpo

Catalogs
Xantrex
PROsine TM 2.0 Inverter/Chargers

PROsine TM 2.0 Inverter/Chargers

Product catalog summary

Overview
Xantrex Technology Inc. offers the PROsine 2.0 Inverter/Chargers, which provide 2000 watts of true sine wave AC power from a DC source and feature a 100-amp multistage battery charger. These units are designed for high efficiency and versatility, suitable for various applications including marine and ambulance use.

Product Features

2000-watt inverter with a 4500-watt surge capacity.
True sine wave output with less than 2% THD.
Built-in 30 A transfer switch for automatic power transfer.
Series stackability for 120/240 VAC applications.
Power sharing feature to prevent shorepower breaker tripping.
Includes LCD remote control panel and battery temperature sensor.
Compact, lightweight, and easy to install with a two-year warranty.

Remote Control Panel

Independent controls for inverter and charger.
Push button controls for power sharing, equalizing, and system configuration.
Backlit digital display for system information.
Monitors battery temperature for accurate charging.

Protection Features

Over voltage, under voltage, and over temperature protection.
Automatic overload and short circuit AC backfeed protection.

Options

GFCI version available.

Electrical Specifications - Inverter

Output power: 2000 watts continuous, 4.5 kW surge.
Output voltage: 117 VAC RMS, 60 Hz.
Efficiency: 87% full load, 89% peak.
No load power draw: <25 W inverting, <2 W in search mode.
Input DC voltage range: 10 − 16 VDC.

Electrical Specifications - Charger

Output current: 100 A DC continuous.
Output voltage range: 0 − 17.5 V.
Charge control: 3 stage with manual equalize.
Efficiency: 81% typical.
AC input power factor: 0.99.

General Specifications

Compatible with flooded, gel, AGM, and Pb-Ca batteries.
Transfer relay rating: 30 A, 1.5 HP, 120 VAC.
Operating temperature range: -4°F to 140°F (-20°C to 60°C).
Dimensions: 17.7 x 11.2 x 5.7 inches.
Weight: 24.0 lb (11 kg).

Regulatory Approvals

CSA/NRTL certified to CSA 107.1, UL 458.
KKK-A-1822D compliant for ambulance use.
ABYC compliant for marine use.

Note: Specifications are subject to change without notice.

Catalog excerpts

2000 Watt True Sine Wave Provides 2000 watts of true sine wave AC power from a DC source and 100-amp multistage battery charging A powerful all-in-one solution, PROsine 2.0 inverter/chargers deliver up to 2000 watts of unsurpassed clean true sine wave output power and combines this with a 100 amp, multistage battery charger. Series stackability allows for two units to power 240 VAC applications such as power tools, over ranges, washer/ dryer combinations and air conditioner. The system includes a full function LCD remote control panel and battery temperature sensor. Product Features 100 A power factor corrected multistage charger True sine wave output (crystal controlled) Built-in 30 A transfer switch automatically transfers between inverter power and incoming AC power Series stackability for 120/240 VAC (requires two units) Power sharing reduces charging current when AC loads are activated to prevent tripping Equalization mode conditions batteries for longer life Optional GFCI version available LCD remote control panel and temperature sensor included Compact, lightweight, and easy to install Remote Control Panel ► Independent inverter and charger on/off controls ► Push button control of power sharing, equalizing, battery set-up, and system configuration ► Easy to read backlit digital text messaging display ► Numerically displays AC and DC system information including volts, amps and state of inverter/charger ► Monitors battery temperature and adjusts charger to provide an accurate charge in any climate Protection Features ► Over voltage and under voltage protection ► Over temperature and automatic overload protection ► Short circuit AC backfeed protection © 2004 - 2008 Xantrex Technology Inc. All rights reserved. Xantrex, Smart choice for power and PROsine are trademarks of Xantrex International, registered in the U.S. and other countries. CSA/NRTL certified to UL & CSA standards Burnaby, British Columbia 541 Roske Drive, Suite A Elkhart, Indiana

Open the catalog to page 1

Smart choice for power" 2000 Watt True Sine Wave Inverter/Chargers Electrical Specifications - Inverter Output power continuous Output current Output voltage Output frequency Output waveform True sine wave <2%THD typical Efficiency (full load) Peak efficiency No load power draw (inverting) No load power draw (search mode, 3 s interval) Input DC voltage range Electrical Specifications - Charger Output current 100 A DC continuous Output voltage 12 VDC nominal Output voltage range 0-17.5 V Charge control 3 stage with manual equalize Charge temperature compensation Remote battery sensor AC input...

Open the catalog to page 2

All Xantrex catalogs and brochures

Archived catalogs

Xantrex Renewable Energy Catalogue
40 Pages