Automatic Generator Start (AGS) Automatic Generator Start System Starts and stops your auxiliary generator automatically Xantrex’ Automatic Generator Start (AGS) is a panel and a control module system that provides automatic activation for your generator. It can be configured so that any combination of low battery voltage or air conditioner activation starts the auxiliary generator. After running for two hours, the system will automatically stop the generator. The AGS has a user-friendly interface that displays important system information for setting and monitoring generator start and stop-times. Light Emitting Diode (LEDs) display status, Quiet Time and the time zone settings, allowing you to set desired start and stop times. Product Features Enables the user to set quiet times, preventing inappropriate generator operation Compatible with any inverter/charger system Compatible with various Onan and Powertech generators (see specifications) User interface simplifies setting of operational times and time zones Setup options include thermostat start and voltage start Connector option available (requires wire harness) One year warranty Xantrex Technology Inc. Headquarters 8999 Nelson Way Burnaby, British Columbia Canada V5A 4B5 800 670 0707 Toll Free 604 420 1591 Fax 541 Roske Drive, Suite A Elkhart, Indiana USA 46516 800 446 6180 Toll Free 574 294 5989 Fax © 2008 Xantrex Technology Inc. All rights reserved. Xantrex and Smart choice for power are trademarks of Xantrex International, registered in the U.S. and other countries.

Automatic Generator Start (AGS) Automatic Generator Start System Specifications Input supply voltage 12 volts (to start generator) Battery sense 12 VDC nominal, used to sense low battery voltage To Onan 3 wire start/stop system Start and stop line Connects momentarily to generator ground to stop generator Compatible generators Onan Quiet Diesel (QD) Series (Onan QD 7.5/8 kW SPEC F and 10/12.5 kW ALL) PowerTech CD 7000 SI 7 kW or CD 8000 SI 8 kW Diesel Generators Operating temp. range 3.75 x 5.75 x 0.93” (control panel size) 4.25 x 6.57 x 1.9” (control module size) Part numbers 84-2064-00 (AGS...