WIWA FLEXIMIX
1 / 16Pages

FLEXIMIX – EQUIPMENT PROGRAM The WIWA FLEXIMIX Series, proven technology that leaves no wish open: The new electronic WIWA two-component mixing and proportioning units for a wide variety of pressure ranges and all applications with freely adjustable mixing ratio. With little training required, this equipment is quick and easy to operate. The user friendly control panel enables start-up within seconds. WIWA‘s unique mixing and proportioning system allows trouble-free processing of materials with a short potlife. For materials with a potlife less than a few minutes, however, we recommend the...

Technical data Pressure ratio Max. allowed spray pressure Input voltage Weight (depending on version) Fluid wetted parts stainless steel carbon steel/ stainless steel carbon steel/ stainless steel carbon steel/ stainless steel carbon steel/ stainless steel Controllable components Abrasive materials Filled materials Application types Airless, Air-Combi, HVLP, Electrostatic, Conventional spray touch screen rotary switch rotary switch rotary switch rotary switch with optionally available special metering sensors

The advantages of WIWA mixing and proportioning technology Competitive variable two-component unit long cycle intervals WIWA FLEXIMIX II shorter cycle intervals WIWA DUOMIX simultaneous metering FLEXIMIX system advantages • Automatic shutdown for off-ratio and runaway pump protection. • Suitable for the processing of sol vent-based and solvent-free materials. In the stainless version, it is suita ble for use with water-based lacquers and other aggressive materials. • Suitable for all lacquers and paints, as well as filled and abrasive materials. • Minimizes flushing and solvent usage since...

Ideal as a multiple color unit with freely adjustable mixing ratio The WIWA FLEXIMIX I is an electronic mixing and proportioning unit for the processing of solvent and water-based paints. Through its precision and flexibility, the WIWA FLEXIMIX I attains a high efficiency and provides first-class surface quality. The FLEXIMIX I is thus the optimal solution for industry and trade. The unit allows the rapid change of up to 16 different paints and lacquers. The system can be used for low, as well as high pressure spraying. Paints of the greatly differing viscosity can be processed at outputs...

TECHNICAL DATA Volumetric mixing ratio Proportioning tolerance Max. allowable spray pressure Controllable valves Input voltage Weight (depending on version) Suitable for abrasive materials only with special metering sensors AREAS OF APPLICATION • For many areas of application in industry and trade requiring frequent color change • Furniture industry • Painting contractors • Machine and vehicle manufacture • Automatic and manual lacquering and coating lines

The two-component unit for lacquering The FLEXIMIX II PHOENIX is a robust, high-performance, multi-purpose two-component painting and coating unit with freely adjustable mixing ratio. WIWA engineers take both pride and pleasure in conti- nually developing cutting edge technologies to solve our customer‘s needs. One result of this is the electronic control system of the FLEXIMIX II unit. It provides high proportioning accuracy in daily operation and insures that this design concept can be used in almost all application processes in industry and trade. When necessary, the FLEXIMIX II unit can...

TECHNICAL DATA Weight (depending painting lines • Furniture industry • Industrial coatings • Machine and vehicle manufacture • Steel construction and structures

Rapid color changes allow you to Blue, strong, compact – this is how the WIWA FLEXIMIX II PROFESSIONAL presents itself. With a maximum spray pressure of up to 460 bar or a maximium output of over 24 liters per minute, this is the FLEXIMIX II version used for large projects with varying requirements. The high- performance, sturdy system is more than suited for the proportioning your capacity and application of low to high-viscosity two-component materials even with short potlifes. For coating materials with extremely high viscosity, the unit can be optimally fitted with fluid heaters or...

TECHNICAL DATA Volumetric mixing ratio Pressure ratio Max. spray pressure up to 460 bar Output per cycle (depending on pump combination) up to 306 cm3 Proportioning tolerance Controllable valves Input voltage Output at 40 cycles 1:1 to 24.4 ltr. (depending on pump 4 :1 to 15.3 ltr. combination) 10:1 to 13.4 ltr. Max. air inlet pressure Weight (depending on version) AREAS OF APPLICATION Large surface-area applications and high-build coatings in these areas: • Marine and offshore industry • Pipe and tank coating • Noise reduction and fire protection • Structures and corrosion protection •...

Maximal output for the highest To meet the highest demands for performance is why the new electronic FLEXIMIX II HERKULES two-component series was designed and built. The enormous surface coverage, high coating thickness and the capability for simultaneous operation with several spray guns or high-build coatings. Even materials which were never or only conditio- extremely long hoses makes it especially suitable for large surfaces or nally sprayed before can be processed using the FLEXIMIX II HERKULES. Because of its high output, the Herkules two-component series is also ideal for manual and...

TECHNICAL DATA Volumetric mixing ratio Pressure ratio Max. spray pressure up to 450 bar Output per cycle (depending on pump combination) up to 550 cm3 Proportioning tolerance Controllable valves Input voltage Output at 40 cycles 1:1 to 44 ltr. (depending on pump 4:1 to 27.5 ltr. combination) 10:1 to 24.2 ltr. Max. air inlet pressure Weight (depending on version) AREAS OF APPLICATION • Marine and offshore industry • Pipe and tank coating • Industrial coatings • Insulating coatings • Noise reduction and fire protection • Heavy corrosion protection • Automatic painting lines and other areas...