750-3000 lb Worm-Gear Hand Winch Models W2, W5 and W10: Intended for intermittent hand use; not recommended for power operation. • Open worm gear design • Ductile iron frames • Cast iron frames • Cast steel worm gears • Steel shafts • Steel lock-on operating handles • Optional gear cover Models W100-3, W100-6 and W200-5: Intended for heavy duty hand use; not recommended for power operation. • Fully enclosed worm gearing • Steel frames • Precision machine cut steel worm • Bronze worm gear • Free spooling Pictured: W100-6 Models W100-3P, W100-6P and W200-5P: Intended for heavy duty hand use or convertible for intermittent power use. These models include all of the features of the fully enclosed 100 series hand models listed above, plus: • Anti-friction ball bearings and internal friction device makes models suitable for intermittent power operation • Unit not furnished with free spooling features Warning: Before installation see maintenance and operations manual for additional warnings and precautions. This equipment is not to be used for lifting, supporting or transporting people or lifting or supporting loads over people. Options Available: • Gear Cover W2, W5 P/N 6191 W10 P/N 6192 • Drill Chuck Adapter* W100-3P P/N 1287 W100-6P P/N 1287 W200-5P P/N 1286 • Marine 812 polyurethane finish available on all models, add suffix “M” to model code. *Drill chuck adapter: 5/8” nominal diameter shaft, 3/4” drill chuck recommended. Made in the USA 5319 Shreveport-Blanchard, Hwy., Shreveport, LA 71107 P: 318.929.1242 • www.wintech-winches.com • F: 318.929.1245

Due to our policy of continuing development, all specifications are subject to change without notice. Users of these products are responsible for ensuring their suitability for the application in which they are being used. Wintech International, LLC 5319 Shreveport-Blanchard Hwy. Shreveport, LA 71107 P: 318.929.1242 • F: 318.929.1245 www.wintech-winches.com