- Catalogs
- Wintech International LLC
- Spur Gear Hand Winches - 2 and 5 Ton
Spur Gear Hand Winches - 2 and 5 Ton
Spur Gear Hand Winches - 2 and 5 Ton
- Constructed with cast steel drums and ring gear, and steel load-bearing components.
- Equipped with replaceable bronze bushings and a cast steel frame.
- Includes a 14-inch long adjustable steel operating handle with pinion.
- Features a spring-loaded holding dog with a release handle and an adjustable holding brake.
- Allows for easy free spooling and offers a two-speed gear change for fast cable take-up and easier winching.
- Not suitable for lifting, supporting, or transporting people or loads over people.
- The accessory drive pinion is intended only for faster cable take-up by power with no load and should not be used for power-driven winch or hoist operation.
- Models include LM6, LM10, LM16, HM8, HM12, HM16, and HM24, with varying drum capacities and weights.
- Gear ratios are 4:1/22:1 for 2-ton models and 4:1/24:1 for 5-ton models.
- Dimensions vary by model, with specific measurements provided for each.
- 28-inch diameter hand wheel and hand wheel for units with disc brake handle.
- Extended shaft pinion and power drive pinion.
- Gear covers, disc brake handle, marine top coat, reverse dog assembly, and drum divider flange.
Catalog excerpts
2 and 5 Ton Spur-Gear Hand Winch Standard Features: • • • • • • • • Cast steel drums and ring gear Steel load bearing components, cast steel frames Replaceable bronze bushings One piece fully adjustable 14” long steel operating handle with pinion Spring loaded holding dog with release handle Hand operated, adjustable holding brake Easy free spooling Two speed gear change offers fast cable take up and easier winching Options Available: • • • • • • • • • Pictured: HM12 Description LM HM 28” diameter hand wheel 1580-2 1580-1 Hand wheel for units with 3628 3628 Warning: Before installation see maintenance and disc brake handle (SBH) operations manual for additional warnings and precautions. Extended shaft pinion 1 7/16“ x 12” 2833 991 This equipment is not to be used for lifting, supporting or transporting people or lifting or supporting loads over Power drive pinion** 1942 1948 people. Gear covers 250-B 249 Disc brake handle 3679 3677 Marine 812 top coat Capacity Gear Drum Capacities (ft.) Weight Reverse dog assembly Model (US Tons) Ratio 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" (lbs) Drum divider flange ** Warning: Accessory drive pinion is intended only for faster cable take-up by power with no load, and should never be used for power driven winch or hoist operation. Made in the USA 5319 Shreveport-Blanchard, Hwy., Shreveport, LA 71107 P: 318.929.1242 • www.wintech-winches.com • F: 318.929.1245
Open the catalog to page 1
Due to our policy of continuing development, all specifications are subject to change without notice. Users of these products are responsible for ensuring their suitability for the application in which they are being used. Wintech International, LLC 5319 Shreveport-Blanchard Hwy. Shreveport, LA 71107 P: 318.929.1242 • F: 318.929.1245 www.wintech-winches.com
Open the catalog to page 2All Wintech International LLC catalogs and brochures
U8A-15 Air Winch1 Page
U12A-22 Air Winch1 Page
WA-45 Air Winch1 Page
WA-160 Air Winch1 Page
WA-220 Air Winch1 Page
Swivel Head Fairlead1 Page
Railcar Pulling System2 Pages
WA1601 Page
U12A-221 Page
U8A-151 Page
WA2201 Page
WA1001 Page
RK Series2 Pages
CP Series2 Pages
BP Series2 Pages
BC-40 Barge Connector1 Page
Standard Upright Barge Winch2 Pages
20HL-E1 Harbor Tug Winch1 Page
WA-100 Air Winch1 Page
WK Series Winch2 Pages
