Catalogs >
Wintech International LLC >
Spur Gear Hand Winches - 10 and 15 Ton

Spur Gear Hand Winches - 10 and 15 Ton
2Pages

Catalog excerpts

Spur Gear Hand Winches - 10 and 15 Ton - 1

10 and 15 Ton Spur-Gear Hand Winch Description: The BW-Series Hand Winches come in 10 and 15 Ton capacity. The “free standing” BW Series hand winch requires no vertical side clearance for operation and can be installed, “as is”, ready to go. These winches include an optional disc brake handle which incorporates a “Weston” style load brake to automatically hold the rated load in lifting applications. Standard Features: • Cast steel frame, drum and ring gear • Replaceable bronze bushings • One piece fully adjustable 14” long steel operating handle with pinion • Two spring loaded holding dogs with release handles • Three speed gear change: 1) 4:1 (unloaded) 2) 19:1 (unloaded) 3) 109:1 (with load) • Hand operated, adjustable holding brake • Gear covers standard on BW models Options Available: • • • • • • • • Accessory drive pinions intended only for faster cable take-up by power with no load (P/N 1948)** 28” diameter handwheels (to order add suffix “W”) Handwheel for units with “SBH” disc brake handle, P/N 3628 Wider drums in 20”, 35” and 60” increments for extra wire rope storage Disc brake handle, P/N 3677 for all models Marine 812 polyurethane finish Warning: Before installation see maintenance and Deck fastner bracket (one pair), P/N 293-B operations manual for additional warnings and Drum divider flange ** Warning: Accessory drive pinion is intended only for faster cable take-up by power with no load, and should never be used for power driven winch or hoist operation. precautions. This equipment is not to be used for lifting, supporting or transporting people or lifting or supporting loads over people. Made in the USA 5319 Shreveport-Blanchard, Hwy., Shreveport, LA 71107 P: 318.929.1242 • www.wintech-winches.com • F: 318.929.1245

Open the catalog to page 1

Spur Gear Hand Winches - 10 and 15 Ton - 2

Maximum drum wire rope storage capacities (tightly wound)* Drum Length (in.) 20 35 60 * Recommended drum working storage capacity is 80% of values shown. *** Not recommended on 10” drum diameter. Due to our policy of continuing development, all specifications are subject to change without notice. Users of these products are responsible for ensuring their suitability for the application in which they are being used. Static Holding (dog) winching tightening (US Tons) Drum Capacities (ft.) Gear Ratio “W” indicates unit is equipped with handwheel. Wintech International, LLC 5319...

Open the catalog to page 2

Spur Gear Hand Winches - 10 and 15 Ton 2Pages

Catalog excerpts

All Wintech International LLC catalogs and brochures

Spur Gear Hand Winches - 10 and 15 Ton
2Pages