Flat P-CAP Marine Display 26” Flat P-CAP Marine Display • 26” 1920 x 1200 resolution with projective capacitive multi-touch screen • Edge-to-edge narrow bezel design and fanless cooling system • Color calibrated for ECDIS compliance • Capacitive touch keys for quick function access and display control (Support ECDIS DAY, DUSK, and NIGHT mode switching) • Compliant with marine standards (DNV2.4, IEC 60945 4th, IACS-E10) 1. USB (touchscreen) 2. RS232 (remote control) 3. DC Power Input Capacitive Touch Keys ECDIS, Home, Brightness(+,-), Power * N o t e: this is a simplified drawing and some components are not marked in detail. *Please contact our sales representative if you need further product information. Display Specifications : User Controls : Resolution Pixel Pitch Contrast Ratio Brightness Viewable Angle Active Display Area Max Colors Touch Screen OSD control via programmable capacitive touch keys (ECDIS, Home, Brightness(+,-), Power) Remote control via RS232 serial interface 1920 x 1200 0.2865 (H) x 0.2865 (V) mm 1500:1(typ.) 350 cd/m2 (typ.) 88°/88°/88°/88° (typ.) (Up/Down/Left/Right) 550.1 (H) x 343.8 (V) mm 16.7 M colors, 8 bits/color Projective Capacitive Multi-touch (Optional AR Protection Glass) Mechanical Mechanical Mounting Dimension Panel Mount Cutout Housing IP Rating Input / Output Connectors Operating Temperature Operating Humidity Anti-Vibration Anti-Shock Panel Mount , VESA Mount 621mm x 432.4mm x 85.5mm 598mm x 408mm Anodized Aluminum Bezel IP66 (Front Side) -15 to 55 deg.C 5% to 95% (non condensing) [email protected] (Class A) 15G,11ms duration RGB Signal IN DVI-D Signal IN DC Power IN Remote control via RS232 Touch Signal OUT D-SUB 15pin connector (female) DVI-D 24pin connector (female) 3pin Terminal block (Phoenix type) D-SUB 9pin connector (female) USB type A connector (female) Power Specifications : Power Input : 24V DC-in with Isolation (9~36V acceptable) Note: All Specifications are subject to change without prior notice!