15" Marine Bridge System Display Portrait Mode Model Model # R15L600-MRM2PT Features: Hyper Dimming : Dimming knob control backlight brightness from nearly 0% to 100% High Quality Panel : High resolution 1024 x 768 panel Anti-Corrosion & IP Proof : IP65 aluminum housing with powder coating design (IP54 rear) Wide Voltage Range Input : 24 V DC to DC power input acceptable (Isolation Resistance) Touchscreen/ Protection Glass : High quality touchscreen / AR protection glass for option : PIP(picture in picture) function and multi-video inputs Multiscan Function IP65 OSD Fornt Panel Design : Ease of use front panel OSD control Anti-Shock and Vibration : Enhanced shock and vibration resistance Type Approved Product Wide Voltage Range Power Module Mechanical Design Drawings Touch Controller IP65 OSD Front Panel Front Bezel Touch / Glass (Optional) Scaling Board Panel Inverter Board (Optional) Metal Frame Modularized Construction Side View Front View Panel Cutout DVI RS232 24V DC Terminal Block for Touch GND RS232 for VGA Remote Control Composite S-Video Bottom View Rear View Note: components are not marked in detail. * Pleasethis is a simplified drawing and someyou need further product information. contact our sales representative if TFT Characteristics: User Controls: Pixel Number : 1024 x 768 Pixel Pitch(RGB) : 0.297 (H) x 0.297 (V) mm Contrast Ratio : 350:1(typ.) Light Intensity : 400 cd/m 2 (typ.) : -85~85(H);-80~70(V) Viewable Angles Active Display Area Max Colors : 304.1 (H) x 228.1 (V) mm : 16.7M (8bit/colors) Power On/Off via front button VR Brightness Knob Control Power Mode Status LED On Screen Display control(OSD) OSD Remote Control via RS-232 Power Specifications: Power Supply Options Power Consumption : 24 V DC power supply with Terminal block (Default, Isolation Resistance),90 to 265V AC power supply : 40 W typical, normal operation Mechanical and Environmental: Input Signals: Composite Video : RCA phono plug S-Video Signal : S-Video (SVHS) plug DVI-D Signal : DVI-D input 24pin connector Mechanical Mounting Operating Temperature Operating Humidity Anti-Vibration Anti-Shock * SAW touch for IP54 DC Power Signal : Screw terminal block : Std IEC Inlet Touch Screen (Optional) : D-SUB 9P connector (female) Remote via RS-232 (Optional) : D-SUB 9P connector (female) Touch Screen Options AR Safety Glass Options AC power Options Bracket Mounting Options : : : : : Panel (Flush) mount with IP65*, VESA, Bracket mounting -10 to 55 deg.C (-20 to 60 deg.C for optional heating) 5% to 95% (non condensing) 5Hz~500Hz / 1Grms/3 Axis 15G, 11ms duraiton : : : : SAW, 5 Wire Resistive 3mm Anti-reflective protection glass Yes (90 to 265 V AC power input) Yes (One robust bracket can adjust from -10 to 30 deg.) Available Options: AC Power Signal (Optional) RGB Signal : D-SUB 15P connector(female) Certification and Approvals : IEC 60945, DVN 2.4, IACS-E10 DNV Type Approval, CE, FCC Note: All Specifications are subject to change without prior notice! Revised Date : 07/06/2009

$'óMí\ú System Oteolnv Mechanical Design with Robust Bracket (optional FRONT VIEW BOTTOM VIEW ROOF MOUNT STAND ANGLE BACK VIEW STAND ANGLE Note: this is a simplified drawing and some components are not marked in detail. Please contact our sales representative If you need further product Information. Note: All Specifications are subject to change without prior notice!