*mynauticexpo

R08T200

Product catalog summary

Product Overview:
Model # R08T200-MRT1 is a marine bridge system display featuring hyper dimming, sunlight readability, and a wide voltage range input. It includes multiscan functionality and an IP65 OSD front panel design, offering enhanced shock and vibration resistance.

Key Features:

Anti-corrosion and IP proof design with IP65 aluminum housing and powder coating (IP54 rear).
Touchscreen or protection glass options available.
Dimming knob for backlight brightness control from nearly 0% to 100%.
Transflective film technology for enhanced visibility.
Operating temperature range from -10 to 55°C, with optional heating extending from -20 to 60°C.
Operating humidity from 5% to 95% (non-condensing).
Anti-vibration and anti-shock capabilities.

Mechanical and Environmental Specifications:

Panel (Flush) mount with IP65, VESA, and bracket mounting options.
Anti-vibration: 5Hz~500Hz / 1Grms/3 Axis.
Anti-shock: 15G, 11ms duration.

Available Options:

Touch Screen: SAW, 5 Wire Resistive.
AR Safety Glass: 3mm Anti-reflective protection glass.
Transflective Options: Enhance visibility.
Bracket Mounting: Adjustable from -10 to 30 degrees.

Power Specifications:

Power Supply: 9 to 36 V DC with terminal block.
Power Consumption: 13 W typical during normal operation.

Display Specifications:

Resolution: 800 x 600 pixels.
Pixel Pitch: 0.213 (H) x 0.213 (V) mm.
Contrast Ratio: 250:1 (typical).
Light Intensity: 350 cd/m² (typical).
Viewable Angles: -50~50(H); -30~60(V).
Active Display Area: 170.4 (H) x 127.8 (V) mm.
Max Colors: 262,144 (6bit/colors).

Connectivity:

RGB Signal: D-SUB 15P connector (female).
Composite Video: RCA phono plug.
S-Video Signal: S-Video (SVHS) plug.
DC Power Signal: Screw terminal block.
Touch Screen (Optional): D-SUB 9P connector (female).

Control Features:

Power On/Off via front button.
VR Brightness Knob Control.
Power Mode Status LED.
On Screen Display control (OSD).
OSD Remote Control via RS-232.

Design and Construction:

Modularized construction with robust bracket options.
Mechanical design drawings available for front, side, rear, and bottom views.

Additional Notes:

Specifications are subject to change without prior notice.
Extra charge applies for back covers with bracket holes for products purchased before the end of November 2008.

Catalog excerpts

Mdíta^ Bifide Svùìmiì DteöJrJV Hyper Dimming Sunlight Readable Wide Voltage Range Input Touchscreen/ Protection Glass Multiscan Function IP65 OSD Fornt Panel Design Mechanical Design Drawings SunUilfoattifa ra P6SPn»( OSORwnPjnsí AñSoMyCl» fciU-Conoïioi TothSc»» Wásfebagehpul Dimming knob control backlight brightness from nearly 0% to 100% Transflective film technology enhance visibility IP65 aluminum housing with powder coating design (IP54 rear) 9 to 36V DC to DC power input acceptable High quality touchscreen / AR protection glass for option PIPfpicture in picture) function and multi-video inputs Ease of use front panel OSD control Enhanced shock and vibration resistance Front View Pixel Number Pixel Pitch(RGB) Contrast Ratio Light Intensity Viewable Angles Active Display Area Bottom View * Note: This is asimplified drawing and some components are not Please contact our sales representative if you need further prod User Controls: Power On/Off via front button VR Brightness Knob Control Power Mode Status LED On Screen Display control(OSD) Power Specifications: Power Supply Options Power Consumption 9 to 36 V DC power supply with Terminal block 13 W typical, normal operation Input Signals: Composite Video S-Vldeo Signal Touch Screen (Optional) S-Video (SVHS) plug Screw terminal block Note: All Specifications are subject to change without prior notice!

Open the catalog to page 1

-j ïAüïinQ System Dte^Jav Mechanical Design with Robust Bracket (options FRONT VIEW BOTTOM VIEW ROOF MOUNT STAND ANGLE STAND ANGLE ' Note: This isa simplified drawing and some components are not marked in detail. Please contact our sales representative If you need further product Information. nSQk f£ RoHS *Extra charge Is required for backcovers with bracket ^Bfl' SSmîic holes for products purchased before end of Nov. 08' Note: All Specifications are subject to change without prior notice!

Open the catalog to page 2