Product specification Water tight musketeer scuttle Article code 4H15.1 Assen, The Netherlands [email protected] www.winel.nl Musketeer scuttle hatch Q-line (Article code 4H15.) The Musketeer scuttle hatch is a standardized water tight flush round hatch. It is supplied as a completely finished and tested hatch, ready to weld in. It is equipped with the well-known Winel Musketeer closing mechanism. The enclosed drawing presents the exact execution of the described hatch. Class society approval The design and manufacture of the hatches is in full compliance with the class regulations regarding water tight hatches and can be individual approved by all major classification societies. Which rules and regulations are applicable depends on the type of vessel, classification society and the position on the ship. We assume that the approved door & hatch plan covers the approval to place this door on that specific position. Specification Cover: 8 mm steel/stainless steel, 2 stainless steel adjustable hinges, 3 closing points and loose supplied 45x20mm EPDM shore 45 seal. Welding: Continuously Coaming: 8 mm steel/stainless steel plate material, the gasket side is rounded (r=2) to prevent damaging of the seal. Stainless steel hatch stoppers are placed on the position of the closing points Operation: Central closed Musketeer system with galvanized steel closing points. Self braking cleats operate with single action on the handle. Light operation due to 1:33 force transmission. Cleats are fully adjustable. The brass wedges are placed on the frame and are in the clear opening of the hatch (size: 6 mm). Hatch is operated by stainless steel handles. Both handles are removable, by removing the top side handle the hatch is flush. Closing points: The standard hatch is equipped with three closing points. The adjustable hinges create the gasket compression on the hinge side. Hinges: The hinges are adjustable in height. Adjusting can be done with standard tools. The hinge bracket and foundation is made of stainless steel. The hinge points have a fixed turning point. Gas spring: No opening support. Doc. PS/qlinescuttle weathertight/01/250210 Subject to alterations 1 of 3

Product specification Water tight musketeer scuttle Article code 4H15.1 Assen, The Netherlands [email protected] www.winel.nl Bearing material: Orkot® Marine Bearings are manufactured from a unique synthetic composition incorporating solid lubricants for dry running to ensure outstanding wear life. Virtually no swelling in sea water and very low thermal coefficient of expansion provide dimensional stability in arctic and tropical seas. They do not corrode or promote corrosion of the housing and tolerate both edge loading and misalignment. Drains: Drains are not foreseen. After installation the yard...

Product specification Water tight musketeer scuttle Article code 4H15.1 Assen, The Netherlands [email protected] www.winel.nl Packing Packed according our standard packing instructions, on a wooden pallet. How to specify a watertight scuttle (4H15.1): By selecting the right specification the article is specified: Article code 4H15.11.600= Water tight musketeer scuttle,with gas spring steel 8 mm doorplate, steel coaming, with a clear opening of 600 mm Code Steel coaming, steel cover Steel coaming, stainless steel cover Stainless steel coaming, steel cover Stainless steel coaming, stainless steel cover...