Product specification Hatch, water tight, Round model, Winel heavy musketeer with hand wheel. Article code 4H21 Assen, The Netherlands [email protected] www.winel.nl General description The hatch is a standardized water tight hatch. It is supplied as a completely finished and tested hatch, ready to weld in. It is equipped with the well known Winel musketeer closing mechanism. The hatch can be executed in 3 base models. 4H21.1 No opening support 4H21.2 Gas spring 4H21.3 Spring loaded Class society approval The design and manufacture of the hatches is in full compliance with the class regulations regarding hatches and can be individual approved by all major class societies. The rules and regulations that are applicable depend on type of vessel, class society and position on the ship. It is yard responsibility to obtain class approval for the location of the hatch on the ship. Specification Cover: 8 mm steel with suitable stiffening. Welding: Continuously Coaming: 8 mm steel plate material, the gasket side is rounded (r=2) to prevent damaging of the seal. Stainless steel hatch stoppers are placed on the position of the closing points outside the coaming. Operation: Central closed Musketeer system with galvanized steel closing points. Self braking cleats operate with single action on the handle. Light operation due to 1:33 force transmission. Cleats are fully adjustable. The brass wedges are placed inside the frame and are in the clear opening of the hatch (size: 25 mm). Hand wheel: 2 aluminium cast hand wheels with a diameter of 360 mm or with a flush key system from the outside. Closing points: The number of closing points is depending on the specified clear opening in combination with the water pressure. Available sizes: Height: Minimum height Clear opening: Minimum 200mm, maximum height 600mm, maximum Surface treatment: Shot blasted SA2,5 and primed with one layer of Hempel shop primer E1527C, minimal 20 Mu, Cleating rods, handle and mounting materials: stainless steel. Cleats galvanized steel Packing Packed according our standard system. Packed on a wooden pallet.

Product specification Hatch, water tight, Round model, Winel heavy musketeer with hand wheel. Article code 4H21 Assen, The Netherlands [email protected] www.winel.nl 4H21.1 Hatch, Water tight, R=100 corner, Winel heavy musketeer, no opening support The two hinges are adjustable in height. Adjusting can be done with standard tools. The hinge bracket and foundation is made of stainless steel. The hinge points have a fixed turning point. In case of rectangular clear opening the hinge side needs to be specified. 4H21.2 Hatch, Water tight, R=100 corner, Winel heavy musketeer, gas spring The two hinges...

Product specification Hatch, water tight, Round model, Winel heavy musketeer with hand wheel. Article code 4H21 Assen, The Netherlands [email protected] www.winel.nl Available article codes Please specify article codes when asking for quotation or ordering: Code Hatch, Water tight, Round model, Winel heavy musketeer, no opening support Hatch, Water tight, Round model, Winel heavy musketeer, gas spring Hatch, Water tight, Round model, Winel heavy musketeer, spring loaded Hatch, Water tight, Round model, Winel heavy musketeer, counter weight Both sides hand wheel Flush key system from the outside (...

Product specification Hatch, water tight, Round model, Winel heavy musketeer with hand wheel. Article code 4H21 Assen, The Netherlands [email protected] www.winel.nl Available options Seal groove double coated (article code 3H21.001): Seal groove double coated white CM7566 & seal glued into the groove. Locking pin into the locking axle (article code 3H21.003): A pin locking device is added on the cleating system. A stainless steel pin is mounted on the lever of the musketeer mechanism. By using this pin the musketeer system is locked from the inside of the door. The pin is fixed to the cover with...