PRODUCT SPECIFICATION Electro-Hydraulic Watertight Sliding door 4411 EAGLE Inland Waterways PO Box 70, 9400 AB Assen, The Netherlands [email protected] www.winel.nl EAGLE Inland Waterways watertight sliding door The electro-hydraulic watertight sliding door type EAGLE Inland Waterways is a compact watertight door. It is supplied as a completely finished and tested unit, ready for welding in. It combines the well known proven mechanical design of the doors with a standardized and simplified hydraulic & electric system. The design and manufacture of EAGLE Inland Waterways doors are in full compliance with the safety regulations for inland waterways to fulfil the watertight integrity of the vessel. The mechanical door construction is approved by all major classification societies. General description / operation & control The EAGLE Inland Waterways has a centralised electro-hydraulic system which means that the system consists of doors which are controlled from a central power pack with valve block and e-control box. The doors are completely assembled, only the rail extensions with support and bolts are loose supplied. The system is capable of closing or opening the doors between 20-40 seconds. Normal local operation Local power operation by push buttons at either side of the bulkhead, closing and opening. “Door open” as well as “Door close” is active operated which means that the door will stop after the release of the push button. The motor is only running while the push buttons are operated. Remote power operation By close switch from the wheelhouse panel (each door). The ‘doors closed’ mode automatically re-closes the doors after they have been opened locally. (pre-warning of 5-10 seconds is provided). The ‘local control’ mode allows the doors to be opened locally without automatic re-closure. Note: Closing above bulkhead deck by means of additional hand pump not required for inland waterways. Alarm/indication signals Locally there are two audible alarm (sounder) combined with a visual alarm (flash light). The wheelhouse panel is equipped with indication lights for open/close indication and alarm signalling incl. buzzer when main or control power supply is lost. P:\17. Sliding door\1 Specification sheet\PS.WTSD [Original]\PS.WTSD.4411 Eagle Inland Waterways revC.doc 06/03/201

PRODUCT SPECIFICATION Electro-Hydraulic Watertight Sliding door 4411 EAGLE Inland Waterways PO Box 70, 9400 AB Assen, The Netherlands [email protected] www.winel.nl Specifications Cylinders Standard: Two (2) cylinders, one located at the top of the door, one at the bottom. Optional: One (1) cylinder, located at the centre of the door (cylinder and bracket loose supplied, piping is yard Sill height Standard: 140mm sill Optional: 40mm sill or 20mm sill (low sill execution) Available sizes Height: max. 2100mm. Width: max. 1200mm. Water pressure Max. 25 mWc (i.e. test pressure) at size 2000x800 mm Limited...

PRODUCT SPECIFICATION Electro-Hydraulic Watertight Sliding door 4411 EAGLE Inland Waterways General arrangement drawings - 4411.11.co HxW (1 cyl. LC) - 4411.12.co HxW (1 cyl. RC) - 4411.51.co HxW (2 cyl. LC) - 4411.52.co HxW (2 cyl. RC) All components are pre-mounted by Winel incl. local electric wiring unless otherwise specified. Options: Wheelhouse panel Panel for installation on the bridge, providing indication and alarm signals of the doors. Panel is executed with a switch for each door to activate the close command, indication lights open/closed, alarm indications for power loss, buzzer,...

PRODUCT SPECIFICATION Electro-Hydraulic Watertight Sliding door 4411 EAGLE Inland Waterways PO Box 70, 9400 AB Assen, The Netherlands [email protected] www.winel.nl Options Sill plate Sill plate stainless steel for flush installation on deck: pre-mounted bolted hinged plate mounted on doorframe. Plate will be lifted up by doorplate during closing of the door. For 140mm sill only. 24Vdc transformer 24Vdc transformer in separate watertight box, loose supplied. NMD package   Internal wiring numbering; all internal wiring of control system will be numbered according e-diagram. Test pressure + 5mWc;...

PRODUCT SPECIFICATION Electro-Hydraulic Watertight Sliding door 4411 EAGLE Inland Waterways End layer paint inside bulkhead plate For easy painting on board the inside bulkhead plate can be painted in a final colour (to be advised by yard at order) before installation of the components. End layer paint door and frame The complete doorframe and doorplate can be painted in a final colour (specification to be advised by yard at order). Note: Paint will be damaged during testing, transport and installation on board. Installation, operation and maintenance manual Additional hard copy in English language....