2016 LV Variable Frequency Drives and Soft Starters Catalog
113Pages

Motors | Automation | Energy | Transmission & Distribution | Coatings WEG Automation Catalog LV Variable Frequency Drives and Soft Starters

General Information WARRANTY TERMS FOR WEG AUTOMATION PRODUCTS (All standard WEG terms and conditions apply to all orders) WEG Automation products are warranted against defects in workmanship and materials for eighteen (18) months from invoicing date if the following requirements are met: • Suitable transportation, handling and storage; • Correct installation within the specified environmental conditions and without the presence of: – Direct exposure to sunlight, rain, high humidity, or sea-air – Inflammable or corrosive gases or liquids – Excessive vibrations – Dust, metallic particles,...

Please fill in the following information completely, otherwise this application will be void. Please send this form to warranty@weg.net or fax it to WEG Service Department at (678) 249-1171. This registration form is also available online. Go to www.weg.net/us and click on OPTIMAL WARRANTY. Location of Application Address Zip Order Information Order # Purchase Date General Information Soft starters and motors that qualify for this Optimal Match Warranty are W22 motors coupled with SSW06 up to 550HP (670A); SSW07 soft starters. This offer is available in the U.S. only. Drives and motors that...

WEG Drives and Soft Starters Quick Selection Guide Soft Starter Enclosure Rating: IP00 / IP20 Motor Wired for 230V Variable Frequency Drive Enclosure Rating: IP20/NEMA 1 Motor Wired for 230V WEG Drives and Soft Starters Quick Selection Guide Data is subject to change without notice.

WEG Drives and Soft Starters Quick Selection Guide Soft Starter Enclosure Rating: IP00 / IP20 Variable Frequency Drive Enclosure Rating: IP20/NEMA 1 WEG Automation - Products and Solutions | 5 WEG Drives and Soft Starters Quick Selection Guide

General Information Data is subject to change without notice.

Variable Frequency Drives Data is subject to change without notice. WEG Automation - Products and Solutions | 7

General Information Variable Frequency Drives My Notes: Data is subject to change without notice.

The WEG Digital CFW10 VFD Series is a very small, easily mounted package, simplified keypad and bright LED readout, complete diagnostics and fully programmable I/O. The CFW10 controls three phase AC motors with a single phase AC input. Single phase 120V AC input voltage will produce three phase 230V to drive motors up to 1 HP and single phase 230 Vac will produce three phase 230V to drive motors up to 3 HP. Increased flexibility and decreased costs are achieved by eliminating the need for a step-up transformer to operate three phase 230 Vac motors when only single phase 115V is available....

General Information Variable Frequency Drives CFW10 CFW10 Catalog Number Sequence CFW10 Rated Current 0016 = 1.6 Amps 0040 = 4.0 Amps 0073 = 7.3 Amps 0100 = 10.0 Amps Options PL = Potentiometer Included Z = End Supply Phases S = Single Phase Table intended as reference only and not to create part numbers. Data is subject to change without notice.

CFW10 IP20 Finger Safe Enclosure Drive Amps 2 Catalog Number Frame Size List Price Input Power Supply: Single-Phase 120 Vac Input Power Supply: Single-Phase 230 Vac List Price IP20 Finger-Safe Enclosure – With Potentiometer Motor HP 1 Catalog Number Frame Size Input Power Supply: Single-Phase 120 Vac 1.6 Notes: 1) “HP” rating based on “average FLA values”. Use as a guide only. 2) Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of drive. For other technical data please refer to WEG product manual. Input Power Supply: Single-Phase 230 Vac Motor Voltage...

General Information Variable Frequency Drives CFW10 Technical Data Power Supply Single phase Single phase Displacement Power Factor (Cos) Control Mode Power Output IGBT Transistors Sinusoidal PWM (Space Vector Modulation) Switching Frequency Frequency Range Overload Capacity Control Inputs 150% for 60 seconds, repeatable every 10 min. 4 programmable isolated digital inputs 1 programmable differential analog input: 0-10V, 0-20mA or 4-20mA Control Outputs 1 programmable relay output: Form C contacts rated 250V / 0.5A DC link over voltage Motor overload DC link under voltage Output...

Technology is at your fingertips with the incredible smallest volume VFD in the market. The CFW100 is a single-phase variable speed drive developed for simple applications ranging from 0.25 to 1 HP. (0.18 kW to 0.75 kW) A strong partner for OEMs, it gives induction motors a selectable scalar (V/F) or voltage vector control (VVW), HMI and plug and play philosophy, with easy and fast installation and operation. Standard Features Variable Frequency Drives • Robust - Overload current: 150% for 60 seconds Ambient temperature: up to 50 ºC • SoftPLC - PLC functions: making it a flexible and...

General Information Variable Frequency Drives CFW100 CFW100 Catalog Number Sequence Frame A, B, C Rated Current 01P6 = 1.6 Amps 02P6 = 2.6 Amps 04P2 = 4.2 Amps Options 20 = IP20 (Std.) Supply Voltage 2 = 200-240 Vac Supply Phases S = Single Phase Table intended as reference and not to create part numbers. Data is subject to change without notice.

IP20 Finger Safe Enclosure Motor Voltage Catalog Number Frame Size List Price Notes: 1) “HP” rating based on “average FLA values”. Use as a guide only. 2) Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of drive. For other technical data please refer to WEG product manual. Input Power Supply: Single-Phase 240 Vac General Information Variable Frequency Drives Catalog Number List Price I/O Expansion and Incremental Encoder Input Module InfraRed Communication Module with I/O 1 Blue Tooth Card CFW100 Bluetooth Comm. Module CFW100 CANopen / Devicenet...

General Information Variable Frequency Drives CFW100 Technical Data Power Supply Single Phase Displacement Power Factor (Cos) Control Mode V/Hz (Scalar) Voltage Vector VVW Power Output IGBT Transistors Sinusoidal PWM (Space Vector Modulation) 2.5, 5, 10 or 15kHz (5kHz Default) Switching Frequency Overload Capacity 150% for 60 seconds, repeatable every 6 min. Control Inputs and Outputs 4 programmable 24Vdc isolated digital inputs (other I/O configurations with option cards) DC link over voltage Output phase-to-ground short circuit DC link under voltage IGBT peak over current Drive over...