Catalogs >
Weatherdock AG >
A052 easyCPA

A052 easyCPA
1Pages

Catalog excerpts

Notified immediately - if necessary! The CPA-alarm is an external signal generatorforthe CPA (Closest Point of Approach)-f unction and for the acoustic notification of an incoming AIS S.A.R.T emergency The easyCPA-alarm is designed as an additional easyTRX2-ISand it improves the safety on board. Together with this external acoustic signal generator it is ensured that previously defined potential dangers are recognised through the CPA-function of the receiver and hence are signalled clearly. AIS emergency telegrams that were sent are also recognised by activated AIS S.A.R.T and are signalised as well. Thus a temporarily delayed perception through sleep or terminal devices which are turned off is The device receives impulses by the easyTRX2 and by the easyTRX2-IS, respectively as soon as the set CPA-function was triggered and turns them into acoustic signals. The easyCPA-alarm has two different signal tones, so that CPA-warnings and AIS S.A.R.T. can be differentiated. What is necessary to operate an easyCPA-alarm? operation. Only with these two devices is it possible to set the incoming AIS signals in relation to the settings of the CPA-function and to initiate respective actions. Technical data: Bottom plate: length 81 mm, width 31 mm • acoustic pressure of the signal generator: 105 decibel • frequency: 2.9 kHz continuous tone • operating temperature range: -20°C - +6o°C • operating voltage is analogous to the connected easyTRX2 or easy TRX2-IS This product is availbale at:

Open the catalog to page 1

A052 easyCPA 1Pages

Catalog excerpts

All Weatherdock AG catalogs and brochures

A052 easyCPA
1Pages