HULLS (PONTOONS)
1Pages

{{requestButtons}}

Catalog excerpts

HULLS (PONTOONS) - 1

ALUMINIUM HULLS (PONTOONS) DISPLACEMENT [kg] MAXIMUM WIDTH [m] HEIGHT OF THE BEAMS [mm] - The displacement is achieved at half draught, i.e. 200 mm, below the highest cross-beams. - Each of the hulls (pontoons) has fastenings for cross-beams every 750 mm. - All hulls (pontoons) are certified and patented. Our hulls (pontoons) are made of sea-proof aluminium sheets PA11 (5754) and PA13(5083), 3 or 4 mm thick. The hulls (pontoons) are welded from 1.5m modules, which build separate, watertight displacement chambers ensuring maximum safety. When the customer orders a complete hull with cross-beams and a beading, he receives a very stiff construction ready for connecting utilities, electricity, tanks, etc. Building boats ready to sail helped us to adjust our hulls (pontoons) to our customers' needs. Our hulls (pontoons) have been appreciated by companies in the country and abroad. We offer three cross-sections of floats, from 150 to 460 litre per linear metre. Hulls (pontoons) with higher displacements and the width exceeding 3 metres are sold and transported dismantled. The assembly of the hull on site does not reguire any special skills (2 people working for approximately 4 hours). On customer's reguest we eguip the hulls (pontoons) with thrusters, tanks, anodes, echo sounder sensors, water duct etc. The shape and form of the hulls (pontoons) are patented and have a CE certificate.

Open the catalog to page 1

All Waterbus S.C. catalogs and brochures

  1. mini cube

    8 Pages

  2. WATERBUS 900

    1 Pages

  3. WATERBUS 700

    1 Pages